Midea Ducted AC

If you are interested in selecting the Midea ducted system among various brands of ducted systems, stay with us as we provide a brief explanation of the Midea brand and introduce you to the different types of Midea ducted air conditioners in terms of capacity, technical specifications, warranty, reasonable price, and more.

Midea Ducted System Experts' Buying Guide and Price List

Midea Group was established in 1968 in China and today is one of the top 5 brands in the world in the production of various home appliances, electronics, and air conditioning equipment.

Midea Group then began producing air conditioning equipment (including air conditioners, ducted splits, chillers, air purifiers, etc.) in 1985.

Midea ducted system air conditioner is one of the main products of the Midea company, produced and offered in various types and capacities.

Midea ducted splits operate at capacities of 24,000, 30,000, and 36,000 with single-phase electricity and capacities of 48,000 and 60,000 with three-phase electricity.

Midea Ducted Split

Features of Midea Ducted System Air Conditioners

The general features of Midea ducted split air conditioner systems include:

High variety of models
Multi-layer filtration
Low-consumption inverter compressor
Ability to connect to hot water coil for heating
External unit fins (gold) resistant to corrosion
Drain pump for condensate water transfer up to 75 cm
Possibility of high piping between indoor and outdoor units (30 meters in height and a total of 50 meters)
Optimized design of the external fan of the external unit to reduce noise levels and increase airflow
Gold fins made of aluminum tubes and mesh copper blades to protect the external unit from decay, increase the life of the device, and increase the efficiency of the condenser for heat exchange

DamaTajhiz HVAC; The First Specialized HVAC Equipment Price Listing and Buying Reference

(Since 2004)

Midea Ducted System Technical Specifications Table and Price List

The following table provides technical information and the best purchase prices for various Midea ducted air conditioners.

Note: The electrical current listed in the table represents the maximum power consumption of the unit in either cooling or heating mode.

Midea Ducted Split Series IDR3

Model	Capacity (BTU/hr)	Compressor Type	Power Consumption (فاز/ A)	Inverter Kit	Indoor Unit Dimensions (mm) Length x Width x Height	Noise level - H/M/L (dB)	السعر (تومان)
IDR-X71MGR3	24000	Rotary	Single phase/ 11	Available	1140x210x450	39/37/29	72,160,000
IDR-X90MGR3	30000	Rotary	Single phase/ 12	Available	1140x270x710	43/39/36	86,240,000
IDR-X105MGR3	36000	Rotary	Single phase/ 13	Available	1140x270x710	43/39/33	98,560,000
IDR-X140MGR3	48000	Rotary	Single phase/ 14	Available	1370x420x691	49/46/45	142,560,000
IDR-X160MGR3	54000	Scroll	Single phase/ 15	Available	1200x300x800	43/39/36	Inquiry-based

Midea Ducted Split Series X

Model	Capacity (BTU/hr)	Compressor Type	Power Consumption (فاز/ A)	Inverter Kit	Indoor Unit Dimensions (mm) Length x Width x Height	Noise level - H/M/L (dB)	Price (Toman)
X71M	24000	Rotary	Single phase/ -	Available	1140x210x450	39/37/29	58,588,000
X90M	30000	Rotary	Single phase/ -	Available	1140x270x710	43/39/36	75,914,000
X105M	36000	Rotary	Single phase/ -	Available	1140x270x710	43/39/33	84,969,000
X140M	48000	Rotary	Single phase/ -	Available	1200x300x800	43/39/36	118,442,000
X160M	54000	Rotary	Single phase/ -	Available	1200x300x800	43/39/36	Inquiry-based

Midea Ducted Split Series M

Model	Capacity (BTU/hr)	Compressor Type	Power Consumption (فاز/ A)	Inverter Kit	Indoor Unit Dimensions(mm) Length x Width x Height	Noise level - H/M/L (dB)	price (Toman)
MTIT-X24MGR3	24000	Rotary	Single phase/ 9.67	Available	1100x249x774	43/41/37	59,950,000
MTIT-X36MGR3	36000	Rotary	Single phase/ 12.1	Available	1100x249x874	50/48/43	88,876,000
MHGT-48WFN1	48000	Rotary	Three-phase/ 6.5	Available	1200x380x625	49/47/45	Inquiry-based
MHGT-55WFN1	55000	Rotary	Three-phase/ 7.5	Available	1200x440x858	51/48/45	Inquiry-based

Thousands of Products for Thousands of Projects (Since 2004)

Midea Ducted System Capacity Determination and Installation Tips

The important points in determining the capacity and installation of different types of Midea ducted split systems are as follows:

To determine the capacity and number of Midea ducted splits needed for the project, first send the latest architectural plans of the units and floors of your building via fax or email to our experts.
Usually, when initially estimating the cooling capacity of the ducted split needed for each apartment in weather conditions like Tehran and on the middle floors of the building (which are not exposed to sunlight on the roof in summer and the cold of the roof in winter), about one ton of refrigeration is considered for every 30 or 40 square meters of the total and gross area of the apartment (each ton of refrigeration is equivalent to 12,000 BTUs per hour). Therefore, if the area of each of your apartment units is more than 120 square meters, it is better to use two ducted splits for each unit.
If your apartment units are even up to 200 square meters, you can still use single-phase duct split ACs with single-phase electricity but 50 amps.
One of the points to consider whairflowen choosing and buying a ducted system is to consider their airflow volume, which is usually equivalent to 400 CFM of air flow volume for each ton of ducted AC capacity. If the airflow volume is lower, the noise level of the ducted split AC will be less, and if the airflow volume is higher, the noise level of the ducted air conditioner will be higher.
You can also refer to the following approximate calculation table for determining the required ducted split capacity, considering the conditions and calculation bases mentioned earlier:

Ducted Split Capacity (BTU)	For middle and ground floor units (m2)	For units under the attic(m2)
18000	up 45	up 35
24000	up 60	up 45
30000	up 80	up 60
36000	up 100	up 80
48000	up 130	up 100
60000	up 150	up 130

Note: This calculation is approximate and only for residential apartments with weather conditions like Tehran and with a ceiling-to-floor distance of 2.8 meters, without the accumulation of people and an increase in latent heat and the use of high-power electrical equipment, and also without glass facades or glass sides, especially on the west side of the space or building in question.

After determining the capacity and number of ceiling ducted systems required, their location is determined based on various parameters such as the existence of a false ceiling, the possibility of ductwork, the method of installing the device's pipes to the outdoor panel, the method of installing hot water pipes to the heating coil, the most suitable installation location in terms of noise level, etc.
The ductwork map from the ceiling ducted air conditioner to each of the spaces (hall or rooms) is prepared and sent based on the most suitable dimensions and the passage above the false ceiling.
Due to the frequent questions of residential unit builders regarding the cost of installing distribution and return air ducts inside the units and installing copper pipes between the indoor duct and the outdoor panel, as a general estimate, the cost of installing them can be considered about 20 to 30 percent of the initial purchase price of the ducted AC system. (Of course, this is an approximate estimate and depends on various factors such as the length of the route and the distance between the two indoor and outdoor panels and other factors).
Before selecting and ordering the purchase of any of the above ceiling ducted air conditioner, pay attention to the single-phase or three-phase (Ø) electricity required for it and also the amperage (A) of electricity consumption according to the power and specifications of your unit's electricity meter.

Buying Midea Ducted Systems

There are several key factors to consider when selecting and purchasing a ducted split system. The first step in choosing the right unit is to accurately determine its type, capacity, and brand. It is important to note that calculating the required capacity should be done by a specialist or expert. Additionally, when purchasing a ducted split system, attention should be paid to its power consumption and amperage.

On the DamaTajhiz specialized website, you can find technical details on dozens of ducted split models from reputable brands with original warranties, ensuring a smart and optimized shopping experience.

The Price of Midea Ducted Systems

Ducted split systems are generally available in two types in the market: inverter and non-inverter models. The inverter type has a higher price compared to the regular model, but its ability to reduce electricity consumption costs over the years can compensate for the higher price. The unit’s capacity and brand are also two crucial factors in determining the price of ducted systems.

It is worth mentioning that all ducted split units offered on the DamaTajhiz specialized website come with a product identification code and are available at competitive prices, with consumer discounts already applied.

"Knowledge Fuels Better Choices"

Registered Trademark and Stewardship Business Licenses Issued by the Union of Virtual Business Association and the HVAC Equipment Industry.
damatajhiz hvac awards
DamaTajhiz HVAC Participation at International HVAC and Construction Facilities Exhibitions Demonstrates its Global Reach and Commitment to the Industry.