DamaTajhiz HVAC Products

1. For use in large spaces and indoor halls
2. Heating power: 400,000 (btu / hr)
3. Can be ordered with single-phase and three-phase electricity
4. In two models of wall and ceiling
5. It has an air outlet damper with adjustable blades

1. For use in large spaces and indoor halls
2. Heating power: 250,000 (btu / hr)
3. Can be ordered with single-phase and three-phase electricity
4. Ability to convert single-speed electric motor to two-speed
5. It has an air outlet damper with adjustable blades

1. Dimensions (H, L, W): 320 * 200 * 200 cm
2. Engine power: 2 hp
3. Normal mass flow of water: 352 GPM
4. Equipped with galvanized and metallic parts
5. All attachments are of non-metallic materials such as PRC-FRP-ABS or stainless steel, or aluminum.

1. For use in large spaces and indoor halls
2. Heating power: 160,000 (btu / hr)
3. Can be ordered with single-phase and three-phase electricity
4. In two models of wall and ceiling
5. It has an electric motor

1. For use in large spaces and indoor halls
2. Heating power: 330,000 (btu / hr)
3. Can be ordered with single-phase and three-phase electricity
4. In two models of wall and ceiling
5. Ability to convert single-speed electric motor to two-speed

1. For use in large spaces and indoor halls
2. Heating power: 54,000 (btu / hr)
3. Can be ordered with single-phase and three-phase electricity
4. Ability to convert single-speed electric motor to two-speed
5. It has an air outlet damper with adjustable blades

1. For use in large spaces and indoor halls
2. Heating power: 74,000 (btu / hr)
3. Can be ordered with single-phase and three-phase electricity
4. In two models of wall and ceiling
5. Dimensions (height, length, width): 58 * 35 * 58 cm

1. For use in large spaces and indoor halls
2. Heating power: 120,000 (btu / hr)
3. Can be ordered with single-phase and three-phase electricity
4. In two models of wall and ceiling
5. It has an air outlet damper with adjustable blades

1. For use in large spaces and indoor halls
2. Heating power: 220,000 (btu / hr)
3. Can be ordered with single-phase and three-phase electricity
4. In two models of wall and ceiling
5. It has an air outlet damper with adjustable blades

1. Dimensions (H, L, W): 240 * 100 * 100 cm
2. Engine power: 3.4 hp
3. Normal mass flow of water: 71 GPM
4. Equipped with galvanized and metallic parts
5. All attachments are of non-metallic materials such as PRC-FRP-ABS, stainless steel, or aluminum.

1. Dimensions (H, L, W): 450 * 350 * 350 cm
2. Engine power: 15 hp
3. Normal mass flow of water: 1770 GPM
4. Equipped with galvanized and metallic parts
5. All attachments are of non-metallic materials such as PRC-FRP-ABS, stainless steel, or aluminum.

1. Dimensions (H, L, W): 320 * 150 * 150 cm
2. Engine power: 1 hp
3. Normal mass flow of water: 212 GPM
4. Equipped with galvanized and metallic parts
5. All attachments are of non-metallic materials such as PRC-FRP-ABS stainless steel or aluminum.

1. Small, light, and very quiet type
2. Special design with small dimensions for optimal placement in the false ceiling (low height)
3. 4-layer aluminum filter and anti-fungal with the ability to wash, install and replace easily
4. Proper and integrated insulation (seamless) in order to significantly reduce noise and energy losses

1. 3-row coil with 3/8 inch copper pipes
2. Has three standard speeds with low volume
3. Possibility to build in two modes: air return from below and air return from behind
4. Has a washable filter with very easy installation and replacement + vent valve
5. For a maximum area of 28 square meters (depending on conditions)

1. 3-row coil with 3/8 inch copper pipes
2. Has three standard speeds with low volume
3. Possibility to build in two modes: air return from below and air return from behind
4. Has a washable filter with very easy installation and replacement + vent valve
5. For a maximum area of 40 square meters (depending on conditions)

1. 3-row coil with 3/8 inch copper pipes
2. Has three standard speeds with low volume
3. Possibility to build in two modes: air return from below and air return from behind
4. Has a washable filter with very easy installation and replacement + vent valve
5. For a maximum area of 56 square meters (depending on conditions)

1. 3-row coil with 3/8 inch copper pipes
2. Has three standard speeds with low volume
3. Possibility to build in two modes: air return from below and air return from behind
4. Has a washable filter with very easy installation and replacement + vent valve
5. For a maximum area of 70 square meters (depending on conditions)

1. Power consumption:220V single phase
2. maximum used infrastructure: 20 square meters (depending on the conditions)
3. Dimensions (H, W, L): 100*22*60 cm
4. High heating capacity with three-row coil
5. Three standard speeds with low noise
6. Easily usable deaeration valve
7. Equipped with galvanized distillation pan
8. Reliable work pressure: 8 bar
9. Washable and highly durable filter

Pre-sale service:
Engineering consulting + calculations and capacity determination

1. Power consumption:220V single phase
2. maximum used infrastructure: 28 square meters (depending on the conditions)
3. Dimensions (H, W, L): 112*22*60 cm
4. High heating capacity with three-row coil
5. Three standard speeds with low noise
6. Easily usable deaeration valve
7. Equipped with galvanized distillation pan
8. Reliable work pressure: 8 bar
9. Washable and highly durable filter

Pre-sale service:
Engineering consulting + calculations and capacity determination

1. Power consumption:220V single phase
2. maximum used infrastructure: 40 square meters (depending on the conditions)
3. Dimensions (H, W, L): 125*22*60 cm
4. High heating capacity with three-row coil
5. Three standard speeds with low noise
6. Easily usable deaeration valve
7. Equipped with galvanized distillation pan
8. Reliable work pressure: 8 bar
9. Washable and highly durable filter

1. 3-row coil with 3/8 inch copper pipes
2. Has three standard speeds with low volume
3. Possibility to build in two modes: air return from below and air return from behind
4. Has a washable filter with very easy installation and replacement + vent valve
5. For a maximum area of 56 square meters (depending on conditions)

1. Power consumption:220V single phase
2. maximum used infrastructure: 70 square meters (depending on the conditions)
3. Dimensions (H, W, L): 200*22*60 cm
4. High heating capacity with three-row coil
5. Three standard speeds with low noise
6. Easily usable deaeration valve
7. Equipped with galvanized distillation pan
8. Reliable work pressure: 8 bar
9. Washable and highly durable filter

1. Power consumption:220V single phase
2. maximum used infrastructure: 56 m2 (depending on the conditions)
3. Dimensions (H , W , L): 48.5*65*90 cm
4. High heating capacity with four-row coil
5. Three standard speeds with low noise
6. Equipped with galvanized distillation pan
7. Reliable work pressure: 8 bar
8. Washable and high durable filter with easy installation and replacement

1. 4-row coil with 3/8 inch copper pipes
2. Has three standard speeds with low volume
3. Has a galvanized distillation pan with a suitable slope
4. Has a durable washable filter with very easy installation and replacement
5. For a maximum area of 70 square meters (depending on conditions)

1. 4-row coil with 3/8 inch copper pipes
2. Has three standard speeds with low volume
3. Has a galvanized distillation pan with a suitable slope
4. Has a durable washable filter with very easy installation and replacement
5. For a maximum area of 110 square meters (depending on conditions)

• 4-row coil with 3/8 inch copper pipes
• Has three standard speeds with low volume
• Has a galvanized distillation pan with a suitable slope
• Has a durable washable filter with very easy installation and replacement
• For a maximum area of 140 square meters (depending on conditions)

1. Function: Heating and Cooling
2. For the area of 25 to 40 m² (according to the conditions)
3. The ability to connect to the hot-water coil for providing heating
4. Dimensions of internal unit(D, H, W): 750*295*1145mm
5. Power consumption: Single phase
6. Energy label: A
7. External static pressure: 1.5/4.2 MPa
8. Fan performance at medium, low, and high speed
9. Washable air filter

• Function: Heating and Cooling
• For the area of 30 to 50 m2 (according to the conditions)
• The ability to connect to the hot-water coil for providing heating
• Dimensions of internal unit(D, H, W): 750*295*1195mm
• Power consumption: Single phase
• Energy label: A
• External static pressure: 1.5/4.2 MPa
• Fan performance at medium, low, and high speed
• Washable air filter

• Function: Heating and Cooling
• For the area of 40 to 60 m² (according to the conditions)
• The ability to connect to the hot-water coil for providing heating
• Dimensions of internal unit(D, H, W): 750*330*1195mm
• Power consumption: Single phase
• Energy label: A
• External static pressure: 1.5/4.2 MPa
• Fan performance at medium, low, and high speed
• Washable air filter

• Function: Heating and Cooling
• For the area of 70 to 90 m² (according to the conditions)
• The ability to connect to the hot-water coil for providing heating
• Dimensions of internal unit(D, H, W): 825*355*1195mm
• Power consumption: Single phase
• Energy label: A
• External static pressure: 1.5/4.2 MPa
• Fan performance at medium, low, and high speed
• Washable air filter

• Function: Heating and Cooling
• For the area of 75 to 110 m² (according to the conditions)
• The ability to connect to the hot-water coil for providing heating
• Dimensions of internal unit(D, H, W): 825*355*1245mm
• Power consumption: Three-phase
• Energy label: A
• External static pressure: 1.5/4.2 MPa
• Fan performance at medium, low, and high speed
• Washable air filter

• Function: Heating and Cooling
• For the area of 100 to 150 m2 (according to the conditions)
• The ability to connect to the hot-water coil for providing heating
• Dimensions of internal unit(D, H, W): 825*355*1295mm
• Power consumption: Three-phase
• Energy label: A
• External static pressure: 1.5/4.2 MPa
• Fan performance at medium, low, and high speed
• Washable air filter