Damatajhiz industrial water heater

Due to the use of galvanized sheets with appropriate thickness and quality, with a suitable delivery time, the industrial water heaters of Damatajhiz are the best option for supplying hot water to high-use places such as public bathrooms, car washes, equipping workshops, etc. In the following, the technical specifications, sales resume, and the best prices of Damatajhiz industrial water heaters are provided. Stay with us.

Damatajhiz industrial water heater at a glance

The industrial water heater provides instant hot water in factories, workshops, public bathrooms, car washes, restaurants, swimming pools, industrial places, some buildings, etc. Industrial water heaters are heat transfer and hot water supply equipment, and in terms of heat transfer, they have a structure similar to other heat transfer equipment and heat exchangers.

Damatajhiz industrial water heater burner

Damatajhiz industrial water heaters can install a fan burner or an electric heating element and are offered in gas or diesel, dual-burner, or electric types with suitable capacity and in different models according to the customer's request. But usually, the burners used in the industrial water heater of Dematahez are Iran radiator burners or Iranian hot burners, which can be changed according to the customers' opinion. Burner installation equipment, including hose, gas filter, diesel nozzle, and strainer, must also be provided for the burner.

The material and thickness of the body of the Damatajhiz industrial water heater

The body of the industrial water heater is made of a hot galvanized sheet with a thickness corresponding to their capacity, from 4 to 8 mm. The welded parts are covered from the inside and outside with the epoxy paint of sanitary water storage sources; the outer part of the source is also painted with white or blue industrial paint (according to the request of respected customers).

In horizontal industrial water heaters, the thickness of the sheet is the same in all parts, but in the standing type, due to the pressure applied to the upper and lower lenses of the tank, especially the lower lens, the thickness of the lenses is considered greater than the body.

Dematheiz industrial water heaters have handholes in smaller capacities and maintenance hole inspection valves in high capacities for inspection and possible repairs.

8 connections are installed on the body of the industrial water heater, which is:

• Cold water inlet connection bushing
• Spa outlet
• The return of the consumed spa
• Drain valve bushing
• Safety valve connection bushing
• Thermostat installation bushing
• Limit Thermostat
• Temperature gauge bushing

- Attention: It should be noted that all types of industrial water heaters that have a direct heating system, such as a burner or even an electric element are actually in the group of hot water boilers, and all technical and engineering precautions must be taken, such as the installation of a reliable and standard safety valve. The respected employer and buyer should install high-quality and healthy thermostats, limit thermostats, and pressure relief valves. They should be reviewed and tested periodically by the project's technical staff to ensure the correctness of their operation.

The lenses at the beginning and end of all types of industrial water heaters of temperature equipment are made of the edged type so that the pressure applied to the edges of the lens does not enter the welding place. On the body of the source, there is a place for installing a burner and smoke outlet chimney.

Furnace of Damatajhiz industrial water heater

The furnace of industrial water heaters is equipped with four, six, and eight-inch fire tube sizes of 4 6, and 8 inches based on capacity and horizontal mode, as two passes back and forth, and in vertical mode, one pass by placing a baffle inside the fire tube produced and supplied.

Damatajhiz Industrial water heater control equipment

To control the temperature of the outlet water stored in this model of industrial water heater, it is necessary to use two submerged thermostats that are installed in series in the circuit; the first thermostat performs the role of initial disconnection and connection, and the second thermostat, which is at a temperature of 10 degrees higher. It is set as a limit thermostat that will operate and turn off the burner if the first thermostat does not work.

To display the temperature inside the outlet water source in the highest part of the industrial water heater, use a temperature gauge that is sheathed from 0 to 120 degrees Celsius. Also, to prevent possible pressure increase inside the source of the industrial water heater, it is necessary to use and install a standard and efficient temperature and pressure safety valve according to the regulations and technical instructions.

Note: regarding the installation of burners on these sources, it is strongly recommended that the temperature equipment use and order the installation of a pressure-relief valve on the source of the industrial spa instead of a safety valve, so if for any reason, the temperature and finally the pressure inside the source exceeds the permissible limits arrived, this pressure relief valve (which has a function beyond normal safety valves) can discharge excess pressure and prevent any accidents.

The order for the preparation and installation of the pressure relief valve can be done at the request and expense of the respected buyer.

Note: During the implementation of the spa piping, please note that the implementation of the return pipe for the spa is necessary due to the large distance between the consumer and the industrial water heater so that the consumer waits for the arrival of hot water after opening the spa valve due to the waste of water. And secondly, to save water consumption. Returning water to the water heater is usually done by a small 1-inch linear pump, which is calculated according to the length of the route, the number of consumers, and the system's capacity.

Buying the Damatajhiz Industrial water heater

You should pay special attention to some tips when buying the Damatajhiz industrial water heaters. Paying attention to these points will make the selected industrial water heater have the performance you want and have higher durability, and make a better purchase. These important and practical points are the capacity and size of the industrial water heater, the amount of energy consumption, the quality and durability of the water heater, the brand and the country of the manufacturer of the peripheral equipment, safety, warranty, and guarantee of the goods, and so on.

On the website of Damatajhiz's specialized collection, technical information of dozens of models of Damatajhiz industrial water heaters with original warranty has been provided so that you, dear ones, can enjoy the good feeling of optimal and smart shopping.

The price of the Damatajhiz industrial water heater

Like other products, industrial water heaters have different types and features such as capacity, type of application, type of fuel consumed, quality, and lifespan of the water heater, among the factors influencing the price of the industrial water heater. However, sufficient information about this heating device has been placed on the reference and specialized website of Damatajhiz so that you can prepare the water heater you need according to them. Also, all the water heaters provided on the Damatajhiz website have reasonable prices, and the discounts consumers desire in These prices are included.

Warranty and after-sales service of the Damatajhiz industrial water heater

Damatajhiz industrial water heaters have a one-year Damatajhiz golden warranty and 10 years of after-sales service.

In the reference and specialized collection of Damatajhiz (since 2004), technical information and guaranteed prices for purchasing all types of Damatajhiz industrial water heaters with a golden guarantee have been provided so that you, dear ones, can enjoy the good feeling of optimal and smart shopping.

To view and learn about the prices, warranty, and technical specifications of all types of models and different capacities of the industrial water heater, click on the "Technical Specifications" tab on the page of each of the following products.

The list of some clients and projects of Damatajhiz industrial water heaters

• Saman Industrial Group project: 500 liter standing industrial water heater of Damatajhiz
• Mr. Hosseini's project (Amol): 1200 liter Damatajhiz standing industrial water heater
• Mr. Houshmand project (Tehran): 600 liter Damatajhiz standing industrial water heater
• Iran Newspaper Company project (Tehran): 300 liter standing industrial water heater
• Project of Aber Bana Sangsar Company (Semnan): 1500 liter standing industrial water heater
• Hadi Store project (Bojnoord): 2 horizontal industrial water heaters of 2000 liters
• Project of Avai Jahanbin Parsian Company (Khuzestan): 2500 liter horizontal industrial water heater
• Ghaemshahr project: 1000 liter standing industrial water heater with temperature equipment
• Mohammadieh Qazvin project: 800-liter standing industrial water heater
• Tehran Pars car wash project: 500-liter horizontal industrial water heater
• The task of Gopeleh company: 3000 liters horizontal two-pass industrial water heater
• Mr. Bamdad's project (Gilan): 500-liter standing industrial water heater with temperature equipment
• Luxury restaurant project (Urmia): 600-liter standing industrial water heater with temperature equipment
• Poland Sanat Bonab Company project: 600-liter standing industrial water heater with temperature equipment
• Project of Fars Shed Company (Shiraz): 200-liter standing industrial water heater
• Mr. Rezaei's project (Karaj-Gohardasht): 600-liter standing industrial water heater with temperature equipment
• The project of Mr. Ismail Shah Hosseini (Garmsar): 1000 liter standing industrial water heater with temperature equipment
• ....