Burner relay

As you know, the main prerequisite for doing anything is to have proper information about that subject. Regarding selection, checking the prices, buying, and getting to learn more about burner relays, the following information is included so that you, dear visitors of the specialized website of DamaTajhiz, can use these tips to get enough information to choose and buy Buying all types of gas, diesel and bi-fuel burner relays from Satronic, Honeywell, Rocco, Siemens, Shkoveh, Landis, etc. brands in bulk.

How to choose and purchase burner control relays?

In general, the control relay is actually the controller of the operation program of any equipment the relay commands. The burner relay is one of the most practical and common types of relays in building heating systems. The task of the burner control relay is to start the engine, start the ignition transformer of the burner, cut off the ignition transformer after ignition, and finally turn off the burner when there is no proper ignition at the time of starting, and the flame goes off during operation. For this purpose, a photocell is used in front of the burner to observe the burner's flame by the photoelectric cell of the photocell.
When the flame of the burner or boiler is turned off, the photocell sends a signal to the relay of the burner. After about 15 to 20 seconds, the burner turns off, and if the glass bubble on the photocell is dirty, it may cause a problem with the flame vision. The burner is turned off by mistake or does not turn off on time. Burner control relays are used in various industries and domestic uses (engine houses), and they have different models according to the types of burners and the fuel type. Join us in introducing and checking the performance of burner relays in the rest of this article (for wholesale purchase).

classification of burner relay

Single-phase relay: used for domestic burners and burners with single-phase electric motors in the approximate range of fewer than 750 watts.
Three-phase relay: It is used for larger burners installed in hotels, hospitals, large residential complexes, and industries whose burner motor is in the range above 750 watts.
Note that the relay base of each burner should be considered according to the type, size, and brand of the same relay.

Gas burner control relay

As the name suggests, the gas burner control relay is used in gas burners. In this way, it is responsible for the electrical control of the burner, and in case of gas leakage or high flame, it cuts off the gas flow in less than 20 seconds, the device turns off, and the burner becomes inactive. Therefore, the role of the gas burner control relay is very important in preventing explosions and dangerous accidents.

Diesel burner control relay

In diesel burners, the fuel used is diesel, which is a combination of hydrogen, carbon, and sulfur. In pressure jet burners, the fuel (diesel) is compressed, and after passing through the nozzle or the injector, it turns into powder, mixes with the air around the nozzle, and ignites by sparking the ignition transformer. The color of the flame indicates the burning of each element of diesel (carbon, hydrogen, sulfur) and the task of the diesel burner control relay (consisting of a transparent and unbreakable polycarbonate resistant frame, an electric timer, a flame detection sensor, and a reset circuit) is to detect the start Combustion is a burner. The base material of the burner control relay is heat-resistant bakelite.

Dual burner control relay

The dual burner control relay is for controlling gas and diesel dual burners and has a housing made of heat-resistant and unbreakable polycarbonate. These controllers work electronically and include a reset button and a guide LED. Dual fuel burner control relay can send operation commands to both control valves for gas and diesel fuel burners.

Atmospheric burner control relay

An atmospheric burner control relay is an alternative to a gas burner control relay. It can be installed on special gas burners that do not have a blower motor, such as burners of some models and bread-baking machines. The advantage of the atmospheric burner control relay over the gas burner control relay is continuous ignition and re-ignition of the burner in the event of a contrary wind blowing and the burner turning off.
In the burner control relay group of the reference website and store of Damatajhiz, you can view the information and prices of burner control relays from reputable brands such as Landis, Shkoweh Electric, Honeywell, Shkoweh, Siemens, etc., for review and selection.
In addition to a valid business license from the heating and air-conditioning trade union, Damatajhiz has an electronic trust symbol and has been operating its store site since 2013 in Tehran's head office.