-
Account
-
Shopping Cart
Cart is empty.
- Out-of-Stock
Sarayel Decorative Floor-mounted Fan Coil Unit SNFZ600
Pre-sale Services :
Engineering consultingCalculating and Determining the capacity
Warranty and after-sale Services :
18 months golden warranty + 20 years technical support{gformbuilderpro:986}
Selection and Purchase Guide for Sarayel Decorative Floor-mounted Fan Coil Unit SNFZ600
Sarayel Decorative Floor-mounted Fan Coil Unit is manufactured with 200-1000 CFM of aeration capacity under technical principals and common standards for construction projects.
Technical Specifications of Sarayel Decorative Floor-mounted Fan Coil Unit SNFZ600
Specifications of Sarayel Fan Coil Unit
- Sarayel Decorative Floor-mounted Fan Coil Unit has three-row aluminum and copper coils (with 8 tubes in each row), each with 8.3 inches of diameter and 12 FPI of distance from each other.
- Sarayel coils are manufactured with the most advanced fully automatic machines and have larger heat exchange surfaces compared to other coils due to using sophisticated Fin Plate technology.
- Copper tubes are mechanically integrated onto staggered sinusoidal aluminum plate fins by the Expander machine to eliminate distances between fins and copper tubes.
- After being manufactured, all coils are degreased with a degreasing solution and tested at 200 PSI of pressure.
- THE reliable operating pressure for Sarayel Fan Coil Unit is 8 bar and suitable for buildings with up to 20 floors.
Specifications of Fan and Electro Motor
The centrifugal fan of the Sarayel Fan Coil Unit is made of ABS with minimum noise, being statically and dynamically balanced with a propylene snail. It should be noted that ABS aeration fans of DamaTajhiz Fan Coil Units can resist up to 100 °C. Moreover, floor-mounted fan coil units have single-phase three-speed electro motors with 0.55 A that are manufactured under the license of Italian Sisme Company.
Frame Specifications
The body assembly includes hinges, inlet, and outlet air and doors made of ABS. Also, aluminum profile fasteners and a front tray of hot-dip galvanized sheet with a powder coating of polyester electrostatic paint.
Insulation
The device is insulated with glued back compressed Airo Flex insulator (3mm thick compressed polyethylene) to prevent heat loss and cold and reduce device noise.
Filtering
Aluminum plate and washable filter can eliminate particles in the air, given filtering type. In these filters, grid sheets are put on each other.
Distillation Pan
Galvanized distillation pan with a proper slope to direct distilled water from the coil surface in warm seasons. To prevent decay, the distillation pan is coated with epoxy powder coating.
Air outlet
The air outlet is made of ABS with the ability to adjust the desired direction.
Advantages of Sarayel Decorative Floor-mounted Fan Coil Unit SNFZ600
- Highly appropriate size to be installed easily
- Three standard speeds with low noise
- Electronic heating coils can be used if customer demands
- Easy access to fan and electromotor for periodic maintenance
- Easily usable deaeration valve
- It can be manufactured with two air return conditions: from below and from back
- Washable and high durable filter with easy installation and replacement
- Insulator used under the distillation pan to prevent it from sweating
- High heating capacity with three-row coil
Determination of Sarayel Fan Coil Units Capacity
One of the most important things in selecting fan coil units is to determine their capacities. For this purpose, you can use the following approximated table:
Warranty and After-sale Services for Sarayel Decorative Floor-mounted Fan Coil Unit SNFZ600
Sarayel Decorative Floor-mounted Fan Coil Unit SNFZ600 has 18 months of warranty along with 20 years of after-sale services of Sarayel Company.
لیست نظرات
error Your review appreciation cannot be sent
feedback Report comment
check_circle Report sent
error Your report cannot be sent
Write your review
check_circle Review sent
error Your review cannot be sent
Shopping Cart
Cart is empty.