Compressor of ducted split

A ducted split is one of the cooling and heating equipment, which today has been well received by air conditioning equipment buyers due to its good performance. One of the important parameters for choosing and buying a ducted split is the relative knowledge of its components. In this article, the most important part used in this equipment, which is known as the engine or the heart of the device, has been discussed. The ducted split compressor is the beating heart of this device, which compresses the refrigerant gas and turns it into a liquid, then makes the refrigerant flow in the operation circuit of the ducted split device somehow plays the main role in cooling the environment, please stay with us in the rest of this article to learn more about the operation and types of ducted split compressors and how they work.

Ducted split compressor

What is a ducted split compressor?

The ducted split compressor is one of the main parts and in fact, the beating heart of the compression refrigeration cycle, which is responsible for compressing and increasing the pressure of the refrigerant gas. The compressor consists of a suction path and a discharge path, which are placed inside the device's condenser. The compressor receives the energy needed to move from electrical energy.

There are many types of compression refrigeration cycle compressors; among the most important of them, piston, scroll, and rotary compressors can be mentioned. The compressor is one of the main and most expensive pieces of equipment, and in case of failure or repair, a high cost must be paid for it. For this reason, you need an expert person in the authorized after-sales service unit of your Ducted Split brand to repair your compressor, and you should not leave the repair to anyone.

How do compressors work?

The refrigerant gas is condensed after entering the compressor and comes out with high pressure and temperature. After leaving the compressor, it is sent to the condenser through a high-pressure pipe and is cooled by an axial fan in the condenser, and turns into a liquid refrigerant. Refrigerant liquid flows towards the expansion valve after the cooling operation by the condenser, and after leaving the expansion valve or capillary tube, it experiences a pressure drop. The refrigerant liquid in the evaporator (internal panel) absorbs the heat of the internal environment and turns it into refrigerant gas again and returns to the compressor. This cycle, which starts from the compressor and ends with the compressor and is repeated continuously, is called the condensation refrigeration cycle.

Types of ducted split compressors

Usually, three types of compressors are used in the production of ducted splits, which include rotary, piston, and scroll types.

Ducted split rotary compressor

Rotary or pen compressors, which are a new generation of compressors, are mostly used in ducted splits in temperate regions such as cities in the north of the country or Tehran. Compared to piston compressors, rotary compressors have lower energy consumption and operating noise. Rotary compressors have 360-degree blades that perform the role of suction and compression of the refrigerant. In this way, the gas enters the compressor through the inlet valve and is sent to the outlet pipe under pressure due to the rotation of the blades and vanes. Rotary compressors are produced in two types, normal and T3, the T3 model is used in ducted splits in tropical regions.

Ducted split piston compressor

Piston compressors are one of the first and oldest types of ducted split compressors. Compression operation in these compressors is done through the piston and cylinder. The piston system is not dissimilar to the cylinder system of the car, only because every time the piston goes back and forth, some of the refrigerant gas in the compressor is drawn into the cylinders and condensed.

Piston compressors are primarily used in southern and tropical regions. The power consumption of the piston compressor is high, and this is a factor, so the ducted splits that work with the piston compressor have a higher cost for their consumers.

Scroll ducted split compressor

Scroll compressors are a new generation of compressors that are also known as spiral compressors. In spiral compressors, usually, one of its plates is fixed and the other is movable, and the way they work is that the gas enters the compressor from the inlet pipe and is compressed by 360-degree blades. The capacity of these compressors usually starts from 3 tons of refrigeration and compared to other compressors, they have a higher price and a longer life.

Damatajhiz; The best prices and brands of construction equipment

Conclusion

In this article, we tried to introduce you to the types of ducted split compressors and we hope that by reading this article, you have gained a better understanding of their performance. Technical information and guaranteed prices of all types of ducted split compressors with original warranty have been provided on the reference and specialized website of Damatajhiz, so that you, dear ones, can enjoy the good feeling of an optimal and smart purchase.

Final word

The specialized collection of Damatajhiz (the first and most reliable source for buying construction equipment and all air conditioning devices, since 2013 and has 3 valid business licenses) offers all its products with the guarantee of the originality of the goods, reliable after-sales service, and warranty. You can refer to the Damatajhiz site to view models and brands, to know the updated price of all products, and to buy all types of ducted split devices. For more information, you can call +9821-88822550 during office hours to get advice from the experts of the air conditioning equipment department of Damatajhiz Engineering and Manufacturing Company.

Related articles

To get more information, it is suggested to read the articles related to the Ducted Split Compressor article.

DamaTajhiz