VRF/VRV System

If you need to use VRF and VRV systems to provide heating and cooling for your project building, stay with us for in-depth information on technical specifics, capacity estimation, how to check, and the best price for all types of central split systems (VRV/VRF).

VRF/VRV System Experts' Buying Guide and Price List

Generally, the central split system, characterized by abbreviations like MULTIV, VRV, VRF, or GHP, has an external condenser (usually on the building roof) and several internal split panels. The internal VRF unit allows you to select the type of split panel and set the desired temperature in each room of the building.

The central split or VRF system is usually used in large buildings and commercial centers.
The power source of these units can be three-phase electricity or town gas, depending on the type or brand.

Due to the use of SCROLL variable speed compressor and variable speed fan motor in the condensers of central split systems, the coefficient of performance (COP) of the unit has increased significantly (around 4), and as a result, these units have a lower amount of energy consumption, greater amounts of cooling and they produce heat.

Today, in addition to the optimizations made in the cooling sector, which reduce energy consumption and the number of control systems required, the new central split system (VRF) (fourth generation) can also provide continuous heating by using an energy-absorbing fluid as an intermediate fluid. (continuous heating).

Challenges in the selection of a VRF/VRV central split system

The following are some of the challenges you might face when selecting a VRF/VRV system:

• Expensive heating system or complete heat pump in the outdoor unit and VRF indoor unit.
  
  
• The absence and manufacture of an external condenser with appropriate capacities for each of the units in the apartment block and a sharp increase in the cost of electricity consumed by a larger condenser.
  
  
• The high cost of copper pipe connections and T-pieces, which can sometimes represent up to 25% of the initial cost of the system.
  
  
• The invisibility of gas leaks from the network of branched copper pipes throughout the building, forcing the use of a gas detector to detect a possible refrigerant gas leak from the system. Another common challenge is the use of VRF systems.
  
  
• The possibility of the refrigerant freezing in the heat exchanger of the unit during the winter season (except for fourth-generation VRF or VRV).
  
  

• On the other hand, hotels (in the southern regions of Iran, of course), office complexes, commercial or shopping malls, and luxurious malls (in the majority of Iran) use the entire central split unit as a single unit and don't need to separate the operating costs of the various units within the unit.
  
  

• In the case of using central split VRF systems (except for the fourth generation) in regions with cold winters, the refrigerant can freeze in the device's heat exchanger during the cold seasons of the year.
  
  
• Usually, the maximum height between the central condenser and the lowest split is about 100 meters, and the maximum distance between the central condenser and the farthest split panel is about 200 meters. The maximum piping length of the entire system is about 1000 meters. This is one of the important issues in system design.
  
  

• Each outdoor condenser, which typically has a capacity of 8 to 20HP, can be combined with other condensers in the form of a building space zoning plan to increase system capacity and use in larger buildings; usually the capacity of the outdoor panels is considered to be about 30% higher than calculated to compensate for the loss of unit efficiency due to compensating piping distances.
  
  

Buying a VRF / VRV systems

The first step to buying a variety of central split ac systems such as mini VRF, should be to pay attention to the dimensions of the installation location and the capacity of the device.

Because, the central split system is produced and supplied in different types with different cooling and heating capacities, and you should consider the size and use of your environment before buying a central split system so that you can choose AC correctly and Get the right model and capacity of the central split system at a reasonable price. Then things like energy consumption, features, brand, and advantages of the central split system in question should be examined.

On the site of DamaTajhiz website, technical information of dozens of models of central split systems, from reputable brands with original warranties, has been presented in order for you to enjoy the good feeling of optimal and smart shopping.

VRF / VRV System Price

The price of a central split system depends on the type, capacity, technical specifications, and brand. For example, the price of VRF depends on the capacity and technical specifications of its indoor and outdoor units.

In order to easily select and purchase the central split system, you must first determine the required dimensions, capacity, technical specifications, and brand. On the DamaTajhiz website, the technical information of dozens of models of central split systems has been presented, from reliable brands with original warranty, so that you, dear ones, can enjoy the good feeling of optimal and smart shopping.

It should be noted that all the central split systems presented on the website of DamaTajhiz have product identifiers and appropriate prices, and the discounts requested by consumers have been included in these prices.

"Knowledge Fuels Better Choices"
Registered Trademark and Stewardship Business Licenses Issued by the Union of Virtual Business Association and the HVAC Equipment Industry.

DamaTajhiz HVAC Participation at International HVAC and Construction Facilities Exhibitions Demonstrates its Global Reach and Commitment to the Industry.

We Look Forward to Your Call and the Opportunity to Meet With You

SHARE THIS CONTENT TO SPREAD THE KNOWLEDGE