-
Account
-
Shopping Cart
Cart is empty.
DamaTajhiz Water cooled Chiller 2DTCHS-180W
Guidance for buying DamaTajhiz Water cooled Chiller 2DTCHS-250W
The DamaTajhiz Water cooled Chiller 2DTCHS-180W is equipped with a screw compressor.
Screw compressors have many advantages such as low noise performance, less vibration, long life, low capacity, power, and close to nominal and real capacity. Connecting to the BMS system or intelligent building control, the most important of which is the gradual operation process and the reduction of coolant energy consumption by 25%.
Declared capacities and specifications are provided in the table above based on cold water temperature, 45°F, and condensing temperature, 122°F.
Declared capacities and specifications are related to Freon 22. You may contact the Dema Equipment Engineering Department for information on other refrigerant conditions.
It is possible to produce a water cooler with a screw compressor of other capacities (BTU) at the request of the buyer.
Screw compressors for DamaTajhiz compressor coolers are usually produced under several valid brands such as Bitzer, Danfoss, and/or based on existing compressors of similar quality.
Changes will be made in technical specifications and equipment used in the DamaTajhiz water-cooled pressure chiller with different prices based on customer request (eg installation of plate heat exchanger for condenser and actuator).
While ordering the required water-cooled pressure chillers, please check the approximate dimensions of the unit for the coolant displacement from the power plant gate and relocation based on the installation location.
Considering the exorbitant expenditures for the supply, implementation, and operation of refrigeration and air conditioning systems including all types of water pressure chillers or compressed air chillers, it is recommended not to make a decision solely based on the opinion or recommendation of the executive elements to select the capacity for all types of chillers required and to enjoy the opinions of the skilled plant engineers in this matter the important.
For further inspection of the accounts and selection of the required chilled water chiller, compressor type, auxiliary equipment, delivery time, and final prices, please contact our experts.
Points must be taken into account after purchasing a water pressure chiller 2DTCHS-180W
Before preparing the transportation of the pressure cooler, it is necessary to carry out a foundation of suitable dimensions (which will be reported to the customer depending on the type and capacity of the coolant) at the place of installation of the chiller in connection with the provision of sufficient access space to the control panel and sufficient space for annual services of the chiller. So please note that before purchasing the water-cooled chiller products from DMequip.
Installation and plumbing notes of the installation of a water pressure cooler 2DTCHS-180W
- Use soft water for the cooling tower water-filling circuit.
- Consideration should be given to the space required for the possible acid washing of the condenser of the device in the engine room.
Warranty and Services Integration of DamaTajhiz Water cooled Chiller 2DTCHS-180W
The "DamaTajhiz" screw compressors have a refrigeration capacity; With a 1-year performance warranty and 10 years of after-sales service.
When ordering the required refrigerant compressor, check its approximate dimensions to allow refrigerant to pass through the engine room door and be transported to the refrigerant installation location.
Due to the high costs of setting up, implementing, and operating refrigeration and air conditioning systems, including water or air refrigeration screw compressors, to determine the capacity of the required types of refrigerants, do not make decisions based solely on the opinion or advice of executives, but on this important matter, be sure to use the opinions of Experienced facility engineers.
Changes in the technical specifications and equipment of the refrigeration “DamaTajhiz” scroll compressor can be made, according to the customer’s request (such as the installation of a plate transformer for the condenser and evaporator) at different prices.
Contact our experts for a more detailed calculation of the required water coolant, type of compressor and accessories, delivery time, and final prices.
If you want to buy a water cooled chiller in another capacity, click on the link or contact us.