-
Account
-
Shopping Cart
Cart is empty.
- Out-of-Stock
DamaTajhiz Water cooled Chiller 2DTCHS-100W
Buying Guide of DamaTajhiz Water cooled Chiller 2DTCHS-100W
DamaTajhiz Water cooled Chiller 2DTCHS-100W is equipped with a screw compressor.
Screw compressors have many advantages such as low noise performance, less vibration, long life, low capacity, power, and close to nominal and real capacity. Connecting to the BMS or intelligent building control system, the most important of which is the gradual operation process and the reduction of chiller energy consumption by 25%.
The stated capacities and specifications are provided in the above table based on a cold water temperature, of 45°F, and a condensing temperature, of 122°F. You may contact your equipment engineering department for information on capacity in other cases.
Declared capacities and specifications are for Freon 22. You may contact the Supply Engineering Department for information on the conditions of other refrigerants.
It is possible to produce a water chiller with a screw compressor in other capacities (BTU) upon the buyer's request.
Screw compressors for DamaTajhiz compression chillers are usually produced under several valid brands such as Bitzer, Danfus and/or based on existing compressors of similar quality.
Changes in technical specifications and equipment used in DamaTajhiz water-cooled pressure chiller with different prices will be made based on customer demand (eg installation of plate heat exchanger for condenser and actuator).
While ordering your required Water Cooled Pressure Chillers, please check the approximate dimensions of the unit for refrigerant displacement from the power station portal and portability based on the installation location.
Given the exorbitant expenses for the supply, implementation and operation of refrigeration and air conditioning systems including all types of water pressure chillers or compressed air chillers, it is recommended not to take a decision solely based on the opinion or recommendation of the executives to choose the capacity for all types of chillers required and to enjoy the opinions of skilled facility engineers in this regard. the important.
For further calculation inspection and selection of the required chilled water chiller, compressor type, auxiliary equipment, delivery time and final prices, please contact our experts.
Points to consider after purchasing a DamaTajhiz Water Cooled Compression Chiller
Before preparing the transport for the pressure chiller, it is necessary to carry out a foundation of suitable dimensions (which will be communicated to the customer based on the type and capacity of the chiller) at the place of installation of the chiller about providing sufficient access space to the control panel and sufficient space for annual servicing of the chiller. So please note that before purchasing the water-cooled chiller products from DMAEQUIPMENT.
Notes for the installation and plumbing of DamaTajhiz screw compressors for refrigeration
Use water without hardness for the cooling tower water-filling circuit.
The space required for potential acid washing of the instrument condenser in the engine room must be taken into account.
Warranty and services DamaTajhiz screw compressors for refrigeration
DamaTajhiz refrigeration screw compressors have; With a one-year performance warranty and a 10-year after-sales service.
When ordering the required refrigeration compressor, check its approximate dimensions to allow the refrigerant to pass through the engine room door and move it to the refrigerant installation position.
Given the high costs of setting up, implementing and operating refrigeration and air conditioning systems, including screw compressors for water or air refrigeration, to determine the capacity of the required types of refrigerants, do not make decisions based solely on the opinion or advice of the operators, but for this important matter, be sure to use the opinions, Experienced facility engineers.
Changes in the technical specifications and equipment used in the “DamaTajhiz” refrigeration screw compressor can be made according to the customer’s request (such as installing a plate transformer for the condenser and evaporator) at different prices. Click on the link or contact us to know the price of a water pressure cooler with other capacities.
Contact our experts for a more detailed calculation study, water cool required, type of compressor, accessories, delivery time and final prices.