Absal Evaporative Cooler AC70R

 Purchasing Guide for Absal Evaporative Cooler AC70R

 Due to the hot and dry climates of Iran's central, western, and eastern cities, an evaporative cooler is the most suitable cooling system for these areas. The evaporative cooler uses less energy to evaporate water than other cooling systems; as a result, it saves energy.
The evaporative cooler also prevents the skin from drying out and cracking wooden furniture. With its updated design and in compliance with international standards, Absal's evaporative cooler creates the necessary humidity in hot and dry weather and gives you a pleasant and refreshing climate.
Absal Evaporative Cooler AC55R is designed and manufactured in such a way as to be able to be carried and used in various parts of your home. Such as remote control, water level indicator, etc., and to have small dimensions for carrying around.
Damatajhiz site provides technical specifications as well as after-sales services for, Evaporative Cooler prices are guaranteed, with a manufacturer's warranty, to create a sense of smart purchasing.

Features of Absal Evaporative Cooler AC70R

• Equipped with a two-speed motor
• With a life-saving key
• Water level indicator inside the tank
• It has an electronic key with remote control capability
• Low consumption, standard and affordable compared to other similar products.
• Body and metal parts of high-quality galvanized sheet with a thick coating of powder paint.
• With an integrated plastic impeller, resistant to impact, oxidation, and absorption of dust particles.
• The impeller of the Absal water cooler is balanced by fully automatic devices to prevent impeller vibration and noise during operation, thus increasing the life of the bearings and the cooler.
• Absal water coolers are equipped with a precise water distribution system that ensures the water is sprayed evenly over each straw; This increases the cooling performance of the air conditioner and prevents water from spilling onto the electric motor.

Selection of Capacity and Ducting of Absal Evaporative Cooler

• To calculate the approximate capacity of Absal evaporative cooler required in weather conditions such as Tehran for apartments that are located on the middle floors of the building and their roofs are not exposed to sunlight and their air conditioner ducting is done according to the correct methods. For apartments up to 70 square meters, you can use the evaporative cooler model AC38 Absal / for apartments up to 90 square meters, model AC48 Absal / for apartments up to 110 square meters, and the model AC58 Absal.
• If your apartment unit is on the highest floor of the building and its roof is directly exposed to strong sunlight, observe the other conditions mentioned above for apartments up to 50 square meters of evaporative cooler model AC38 Absal / for apartments up to 60 square meters of model AC48 Absal / For apartments up to 70 square meters, use the AC58 model of Absal.
• The dimensions of the evaporative cooler duct should be considered larger than the dimensions of the air conditioner outlet, otherwise, the air volume will be condensed when passing through the duct and will prevent the proper flow of air through the cooler duct, in other words, whatever the dimensions of the duct It is more appropriate than less static fan pressure will be required for air to pass through, and as a result, the amount of aeration and cooling of the evaporative cooler will increase.
• The cross-sectional area of ​​the air outlet duct from the evaporative cooler for AC 38 models is at least about 1600 cm2 (equivalent to 40 × 40 cm) and for AC 48 models is at least 2300 cm2 (equivalent to 48 × 48 cm) and for AC 58 models is at least 2500 Considering a square centimeter (equivalent to 50 × 50 cm), the exact dimensions are calculated based on the length of the duct path, the volume of air required and the detector.
• Aeration and cooling by evaporative coolers are completely dependent on following duct engineering principles, and generally, it is necessary that installation engineers calculate the duct using a detector and also take into consideration the standards for changing the angle of the path (internal arc radius). It is mandatory to change the dimensions of the ducts (maximum angle of 15 degrees), otherwise, the expectation of generating cool air by the evaporative cooler will not be met, and as can be seen today, consumers will inevitably look for other cooling systems to solve this problem.

Warranty and After-sale Services for Absal Evaporative Cooler AC70R

Absal Evaporative Cooler AC70R has 2 years warranty, and 10 years of after-sales service.