CS CASE air entrainment Valve Model 1315 Size 1/2"

Guidance for choosing and buying CS CASE air entrainment Valve Model 1315 Size 1/2"

CS CASE air entrainment Valve Model 1315 Size 1/2" is used to drain the air entering the water piping system of packages and radiators. The air entering the T system prevents efficiency and causes defects in the system, and this valve is the best tool. To prevent this situation, cs case valves are also called Air-Vent valves, remember that these valves are not used in any way to balance the excess pressure in the system or drain the pressure. It does not and only discharges the air that has entered the water supply network of the package systems and radiators as impurities.
Also, the installation of CS CASE air entrainment Valve Model 1315 Size 1/2" must be vertical, in the following, the correct method of installing these products will be shown.

Features and dimensions of CS CASE air entrainment Valve Model 1315 Size 1/2"

• Can be used in central heating systems, boilers, packages, and radiators
• In general, the above products are used for CCTV heating systems.
• Maximum operating temperature: 110 degrees Celsius
• Working pressure: 10 times
• Prevent serious damage caused by air accumulation in the water supply network
• Prevent and eliminate noise caused by air accumulation in the system
• Made in Turkey

Performance of parts and required information CS CASE air entrainment Valve Model 1315 Size 1/2"

The air entering the system always moves to the top of the system, so the drain valve is installed at the top of the valve to be able to empty the air entering.
As the air empties, the water level inside the system increases, and the flow of water returns to normal.
An increase in the water level moves the float in the valve and directs it upwards to reach the valve pin, which continues until the air is completely drained.

Material of components of CS CASE air entrainment Valve Model 1315 Size 1/2"

• Cover: POM
• Drain Cap: PA6
• Drain screw: POM
• Drain Gasket: NBR
• Drain spring: INOX
• Floating pin: POM
• Floating: PA6
• Body: Brass
• O-ring: EPDM, NBR
• Lower Valve Body (Check Valve): Brass
• Lower valve spring: INOX

General information of CS CASE air entrainment Valve Model 1315 Size 1/2"

• Operating temperature: 5 to 110 degrees Celsius
• Working pressure (non-adjustable): 10, 6, and 3 times
• Type of fluid used: Climate

How to install CS CASE air entrainment Valve Model 1315 Size 1/2"

• Reducing water pressure on the diaphragm is done by applying two opposite forces to the diaphragm valve
• Compressed steel spring pressure
• Water pressure on the diaphragm
• If the spring pressure is higher than the water pressure, the piston moves upwards and if the spring pressure is less than the water pressure, the piston moves downwards.
• Maximum inlet pressure: 16 bar
• Operating pressure range: 6.5 bar 1 bar
• Factory outlet pressure: 3 times
• Type of fluid usable: water
• Maximum operating temperature of milk: 40 ° C

  

  Dimensions of CS CASE air entrainment Valve Model 1315 Size 1/2"

• A: 1/2. equivalent
• B: Equivalent to 72 mm
• C: equivalent to 37 mm
• D: 15 mm . equivalent

Warranty and authenticity of CS CASE air entrainment Valve Model 1315 Size 1/2"

The company approves the originality and physical health of the CS CASE air entrainment Valve Model 1315 Size 1/2".
In the reference site and DamaTajhiz store, various types of valves have been provided for you, dear customers, in order to create a good feeling of optimal and smart purchase of valves.