Chauffagekar Star 1300-15 Cast Iron Boiler

Chauffagekar Star 1300-15 Cast Iron Boiler Selection and Purchase Guide

Chauffagekar Star 1300-15 cast-iron boiler has been manufactured and supplied to the market since 2000. As it is a suitable replacement for integrated steel boilers –that are large and weight– it is a very good choice for use in central heating systems of tall and large buildings.
Technical information and guaranteed prices for a variety of Chauffagekar Star 1300-15 cast-iron boilers, including the original warranty, are provided to our dear customers on the main DamaTajhiz website and stored for a smart and efficient purchasing experience.

Characteristics of Chauffagekar Star 1300-15 Cast Iron Boiler

• Chauffagekar Star 1300 cast iron boiler has ISO 9001:2008 Quality Management Certificate from Swiss SGS Company.
• Chauffagekar cast iron boilers are manufactured with blades, so they can be easily moved by elevators or through stairs without requiring cranes.
• For cast iron boiler prices and more information on purchasing Chauffagekar Star 1300-15 cast iron boiler click on Price and Technical Characteristics on this page.
• Chauffagekar Star 1300-15 cast iron boiler with utilization height capability of up to 100 m can be utilized to supply healthy warm water and heating warm water for buildings with up to 30 floors.
• The most important difference between superheat cast iron boilers and star cast iron boilers is that the running pressure of superheat cast iron boilers is 6 bars at most, while that of Star boilers is 10 at most.
• Running pressure and heat transfer efficiency is very high due to a permissible heating capacity. For this reason, it can be used in furnace rooms of tall buildings.
• The Chauffagekar Star 1300-15 is made of flame retardant cast-iron alloy and produced as separate blades. It is resistant to oxidization, chemical agents effective against surfaces, and environmental agents like humidity and combustion condensates.
• In the past, consumers searched for integrated non-cast iron boilers for central heating systems with pressures higher than 6 bars, but currently Chauffagekar Star 1300 cast iron boilers easily support running pressure up to 10 bars and running temperature up to 105 °C.
• The operation of this boiler is guaranteed for 10 years, and this warranty is unconditional if the installation is correct, and the damaged parts will be replaced.
• In high-pressure industrial cycles, these boilers are simple to operate and because they consist of several parts, all parts can be accessed during service and maintenance by opening the boiler. They can also operate at high pressures in cooling production cycles and single-effect absorption chillers in generators.
• At present, 1300 star boilers are tested up to 16 times or 160 meters in height according to the existing standards, and after the test period, a pressure tolerance confirmation of 10 bar is obtained in the presence of the customer.
• Today, in many apartments and high-rise buildings that have a steel boiler and integrated central heating, the steel boiler after many years has the problem of perforation and inefficiency, and on the other hand due to the condition of the engine room and the impossibility of carrying the boiler The new integrated steel is used to replace the previous boiler with detachable cast iron boilers, model 1300 Star Boiler, which have a working pressure of 10 bar.

Calculation of capacity and installation of cast iron boiler model 1300 Star

• Any change in the final price of cast iron boilers model 1300 will be announced at the time of purchase inquiry.
• Dimensions and price provided for the above boiler with hood are considered.
• Usually, after the above calculation, up to 20% is added to the calculated capacity of the engine room hot water boiler as a reliability coefficient.
• Manometer thermometer installation is required to display the temperature of hot water in the boiler and also the pressure of the building heating system on each cast iron boiler of the engine room.
• To calculate the capacity of the required cast iron hot water boiler based on the number of units, area, and type of use of the building, the presence or absence of a hot water pool, etc., you can consult with the experts of Damatjahiz Company.
• It is also necessary to install a submersible thermostat (submersible aquastat) with a temperature range of 30 to 90 ° C (or 30 to 110 ° C) to adjust the boiler temperature and the off-on command to the burner relay on each cast iron boiler.
• Since the installation of all the main equipment of the engine room, including the central heating boiler on the pre-executed concrete foundation with appropriate dimensions according to the location plan and exactly where the equipment is located, before installing the main equipment of the engine room, including the boiler Cast iron Install the required concrete foundation according to the defined dimensions and standards.
• To calculate the approximate power of a cast iron boiler, first, multiply the area of ​​the useful infrastructure of the building by 100 (kcal) and then add 6000 (kcal) for each residential unit to supply the hot water used. For example, for a building with an area of ​​3500 square meters, useful infrastructure, and 20 apartment units, the required heating power of the boiler is: 470,000 kcal = (20 × 6000) + (100 × 3500)

Advantages of Bladed Warm Water Boiler over Integrated Steel Boilers

• Its smaller size and easy relocation due to the possibility of separating the blades
• Possibility of replacing damaged blades and easy repair compared to integrated steel boilers
• More reasonable price and proper warranty compared to standard steel boilers

The most important factors that increase the life span of the cast iron boiler are

• A uniform and continuous thickness for the casted frame of the cast iron boiler
• Adjusting the flame (it should be blue and burn in a straight line within the boiler)
• The proper length of the combustion chamber of the boiler and non-permanent impact of the flame to the rear or middle blades of the cast iron boiler
• Use a flame in proportion to the calculated heating capacity (flame heating capacity 20% higher than the boiler capacity at most)
• Use a suitable resin softener in proportion to the circulating water volume of the heating system or install a deposit remover of the required size and number on furnace room pipes
• Proper sealing of the blades of the cast iron boiler while installing it as well as not allowing a high water pressure (a high number of floors has undesirable effects on the boiler water pressure)
• Choosing a proper capacity for the central boiler of the building such that, even during the coldest days of the year, the central boiler doesn’t have to run permanently to supply warm water and heat the building.

The Chauffagekar Star 1300-15 Cast-Iron Boiler Warranty

Cast iron boiler model Star model 1300-15, like other products of Chauffagekar company, in addition to a 10-year warranty, has the technical support and extensive after-sales service of this company, all over the country.

In the store and reference site of Damatajhiz, technical information and guaranteed prices of all types of boilers, with the main guarantee, are provided for you to enjoy a good sense of optimal and smart purchase.