-
Account
-
Shopping Cart
Cart is empty.
Iran Radiator Dual-Fuel Burner DP 2
- Maximum heating power: 1,500,000 Kcal / hr
- Fuel consumption: Dual fuel (gas and diesel)
- Combustion mode: one stage
- Engine power: 3 KW
- Power consumption: three phases
Warranty :
1 year Iran Radiator warrantyAfter-sale Services :
10 yearsGuide to Choose and Buy Iran Radiator Dual-Fuel Burner DP 2
Iran Radiator is one of the most highly-recognized active brands in producing heating equipment. This company has begun to produce burner since mid-1991. Desirable technical quality and significantly convenient after-sales service are some of the features of Iran Radiator products.
Features of Iran Radiator Dual-Fuel Burner DP 2
- Iran Radiator Dual-Fuel Burner DP 2 has an automatic damper.
- The amount of gasoline consumption in liters per hour is calculated by dividing the maximum kilo-calorie (kcal) of the healing power of the gasoline burner by 8,500.
- Iran Radiator Company fully supports its products with more than 1000 authorized after-sales service centers throughout the country.
- The amount of gas consumption of a burner in cubic meters per hour is obtained by dividing the maximum heating power of gas burners by 9,200.
- You should pay attention to the diameter pipe of the muzzle brake of the burner to allow the possibility of entering this pipe into the boiler and installing a burner in the boiler's body.
- When you want to choose a burner, in addition to paying attention to its fuel type, its capacity must be nearly 20% greater than the capacity of the boiler or heater's combustion chamber for various reasons.
- Gas filters with the correct size and working pressure are one of the first items for installing in a gas burner's line after the gas quarter round valve and before the gas regulator and solenoid valves.
- Among the most critical required equipment of the gas line in gas burners is installing a gas filter with appropriate size and pressure after the quarter round valve of gas and before the gas regulator and impact or gradual gas solenoid valve of the burner.
- Iran Radiator Dual-Fuel Burner DP 2 with a capacity of 1,500,000 kilocalories suitable for heating hot water boilers, steam generators, supplying warm water for consumption, and heating systems and industrial space.
- It is necessary to use a balancer at the beginning of the gas line to adjust and balance the minor supply gas pressure variations of gas burner power with the required size and discharge of the gas of the burner when the supply gas line pressure of the burner is 2 pounds. Also, it is necessary to install a gas regulator at the beginning of the gas line with the appropriate size, pressure, and gas discharge if the supply gas pressure of the burner is higher than 2 pounds (15 or 30 pounds to a maximum of 60 pounds).
Performance of the Gasoline Burner
- Electromotorphene burners are based on the capacity of single-phase or three-phase burners and have 2900 rpm.
- The body of Iran Radiator dual-burner burners is made of cast aluminum, on which the parts required for the burner function are installed.
- After the formation of the flame, there is no need for a spark or electric arc. With the command of the photocell or ion, the operation of the igniter transformer is stopped. The burner continues its combustion action until the power turns off through the thermostat.
- In fan burners, the operation is based on the thermostat command of the boiler or heater and according to the burner relay schedule, so that first the burner aeration fan is turned on for about 30 to 60 seconds according to the fan relay command, and then the burner igniter transformer starts. It ignites, and then the solenoid valve of the burner fuel (gas, diesel, or fuel oil) opens, and the energy passes through the solenoid valve and enters the combustion chamber of the boiler or heater; despite the transformer spark, the flame forms in front of the burner flame spreader.
Adjusting the Fuel and Air of Iran Radiator Dual-Fuel Burner
Adjusting the fuel/air ratio precisely has resulted in full fuel combustion. The combustion efficiency is increased by adjusting this relative much more accurately and this has resulted in the reduction of required fuel. Small burners use a manual damper to adjust the required air for the combustion of the burner while this setting in large burners is provided by the automatic damper. However, the air damper of large burners must be adjusted again in each season due to the variable temperature of the engine room boiler and its humidity over the year. Nowadays, modern burners are equipped with an intelligent control system (PLC) that adjusts the ratio between fuel and air during a day and all seasons automatically.
When you want to choose a burner, you should consider the burner capacity nearly 20% more than boiler capacity due to some heat losses and incomplete fuel combustion efficiency in burners.
- The fuel combustion efficiency of different types of burners is reduced by about 4% per every 300 meters’ elevation above sea level due to the decrement in air concentration.
- The thermal value of each cubic meter of natural gas is approximately equal to 9,200 Kcal.
- The thermal value of each liter of gasoline is approximately equal to 8,500 Kcal.
- The thermal value of each kilogram of gasoline is roughly equal to 10,500 Kcal.
Warranty of Iran Radiator Dual-Fuel Burner DP 2
Iran Radiator Dual-Fuel Burner DP 2 has a one-year warranty from Iran Radiator Company.
Compare different models and buy burners on the Damatajhiz website.