Iranian dehumidifier for the pool

Due to the evaporation of water from the surface of the pool and hot tub, indoor pools are among the locations that are constantly exposed to moisture. Unwanted environmental humidity can lead to equipment erosion and corrosion as well as serve as a breeding ground for various fungi and skin bacteria. The pool staff uses devices to regulate and absorb the environment's humidity in such a scenario. A dehumidifier is a tool that removes and absorbs moisture from spaces like indoor swimming pools. This page gives some examples of locally manufactured and sold refrigeration cycle dehumidifiers in Iran. Learn more about the Iranian dehumidifier for the pool by joining us.

In what conditions is a dehumidifier used?

Before introducing some examples of Iranian dehumidifiers for the pool, it is necessary to know the conditions under which dehumidifiers are used and what are the requirements for using this equipment.

In pools where it is not possible to change or ventilate the air of the indoor pool area permanently to remove the excess moisture in the air and replace it with fresh air, or the outside air also has a high relative humidity (humidity above 50%) and practically replace it with the air of the pool. Covered does not reduce the humidity of the air in the closed pool environment (such as in the northern or southern regions of the country), so it will be necessary to use a pool dehumidifier to reduce the humidity of the indoor pool area.
In general, if the relative humidity in indoor pools at 25 degrees Celsius is less than 40% (RH), the swimmer will feel cold. (Of course, the ambient air temperature of covered pools should be around 25 to 29 degrees Celsius based on the type of use of the pool)
Also, the presence of more than 60% humidity in the air around the swimming pools is not suitable in any way, because the humidity above 60% not only deprives the swimmers of comfort while breathing but also causes a lot of damage to the building and equipment (especially the equipment) in the long run. electrical and mechanical engine room) enters the pool.
Whenever the difference between the water temperature of the swimming pool or hot tub and the air temperature of the indoor swimming pool is more than 2 to 3 degrees Celsius, the process of water evaporation and increasing humidity, especially from the hot water jacuzzi in the closed environment of the indoor pool, starts.
Pool dehumidifiers are divided into two types with heating coils (to heat the air coming out of the device) and without heating coils in terms of the possibility of heating the ambient air.

Damatajhiz; The best prices and brands of building installation equipment

What is the quality of the Iranian dehumidifier for the pool?

Swimming pool dehumidifiers are manufactured and presented in different capacities with or without heating coils, the specifications of some examples of the best Iranian dehumidifiers are described below.

Click to view brands, models, and different types, find out the price, and buy a pool dehumidifier.

SOVANA pool dehumidifier model S48000

Sovana pool dehumidifier model S48000 with a capacity of 250 litres and a 20-litre tank and air circulation capacity (humidification) of 480 cubic meters per day is a suitable device for dehumidification. The S48000 model is installed in three phases and can extract 250 litres of water per day.

Features of SOVANA pool dehumidifier model S4000

Providing cooling.
The body is made of coated galvanized sheet.
Voltage 400 volts and power 3400 watts.
The compressor power of these products is 3 horsepower and their refrigerant gas consumption is R407.
It has a centrifugal fan and coil made of copper and aluminium and is resistant to moisture.

Other features of this device include a life protection system and an IP65 degree of protection.

SOVANA pool cooling dehumidifier model S120000

S120000 Solana pool cooling dehumidifier can control the humidity level of the pool environment, using the world's most localized technology. As mentioned, this device can control the humidity of the pool environment and reduce the humidity of the pool automatically if necessary. Also, this device can be installed outside (centrally or duct). It means that the device can be placed outside the desired location and still can work, suck moisture and blow dry air inside.

Features of SOVANA pool cooling dehumidifier model S120000

It has an electric power of 10.5 KW
Weights 350 Kg
Use of refrigerant gas R407 and R134
Has a water collection system
Automatic drain valve
It has copper and aluminium coils
The body is made of galvanized sheet
It has artificial intelligence and is equipped with a microcontroller for intelligent regulation of humidity
Equipped with an advanced and fast hot gas defrosting system
It has an internal tank of 50 litres
Equipped with humidity sensor and automatic On/Off function to save energy
Ability to be equipped with a cooling and heating system

Team Parsi dehumidifier model DH-48000A

Team Parsi Pasargad company operates in the fields of laser, water and energy and produces refrigeration dehumidifiers (for domestic and industrial use) and absorption (for special use) in different capacities using rotary, scroll, and screw compressors from reputable brands. is.
Team Parsi dehumidifier model DH-48000A is one of the refrigeration dehumidifiers of Tiam Parsi company, which is produced and supplied for domestic and industrial use.

Features of Tiam Parsi dehumidifier model DH-48000A

Has R407 refrigerant
Type: Refrigerated dehumidifier
For industrial and home use
Equipped with an advanced defrost system
It can operate automatically by determining the humidity or time
Designed and built specifically according to customer needs
It has air-cooled converter coils made of copper and aluminium
It has high efficiency in dehumidifying air with low temperatures and humidity
It has a galvanized body with epoxy and electrostatic coating or rust-resistant steel sheet

Team Parsi dehumidifiers can remove moisture in the form of water in refrigeration models and the form of steam in absorption models.

Team Parsi dehumidifier model DH-24000A

Team Parsi dehumidifier model DH-24000A is another refrigeration-type dehumidifier of Tiam Parsi company, which is produced and supplied for domestic and industrial use.

Features of Tiam Parsi dehumidifier model DH-24000A

Has R407 refrigerant
Type: Refrigerated dehumidifier
For industrial and home use
Equipped with an advanced defrost system
It can operate automatically by determining the humidity or time
Designed and built specifically according to customer needs
It has air-cooled converter coils made of copper and aluminium
It has high efficiency in dehumidifying air with low temperatures and humidity
It has a galvanized body with epoxy and electrostatic coating or rust-resistant steel sheet
Team Parsi dehumidifiers can remove moisture in the form of water in refrigeration models and the form of steam in absorption models.

Final Speech

The specialized collection (Damatajhiz) (the first and most reliable authority in the country in the field of building facilities equipment and all air conditioning devices), offers you all kinds of sand filters and hundreds of other products, guaranteeing the originality of the product, valid warranty, and reasonable price. In addition, if you have any questions about choosing and comparing the brands of this product, you can get free advice from the heating equipment experts.

In Iran, the first and most famous specialized group in the field of building installation equipment, air conditioners, and all equipment for swimming pools, saunas, and jacuzzis since 2004, DamaTajhiz is a specialized group. Refer to the time of this group. For more information, you can get advice from the experts of DamaTajhiz Engineering and Production Company by calling +98 21 88822550.

Damatajhiz Contact Us – Eng