Reducing the building's energy consumption with a smart engine house

The intelligentization of the engine room of the building is one of the relatively cheap and efficient solutions with simple use, which has been of great interest in recent years, and this technology is evolving in our country. One of the most important advantages of these systems is the reduction of energy consumption in the engine rooms of the building, as well as the creation of heat according to the needs of the building.

Click to view brands, models, and different types, find out the price, and Buy HEATING EQUIPMENTS.

What is a smart garage?

Smart engine houses are among the new generation heating systems that are equipped with sensors and actuators that reduce energy consumption and increase the building's cooling and heating efficiency automatically. Smart motorhomes are designed and built based on technology and have differences from traditional motorhomes, which we will discuss below.
The engine room intelligent control system is a set of sensors, relays, and a central intelligent processor that controls and registers the performance of the equipment inside the engine room based on the estimation of the heat load required for the interior of the building. The identification and estimation of the required thermal load of the building space at any moment is collected with weather information and performed by sensors installed in the interior and exterior of the building with a smart engine room, and then the information is processed by the central intelligent processor of this control system. to be
After identifying the building's current thermal load requirement, the sensors and relays of the engine room's intelligent control system, which are installed on the equipment in the building's engine room, control the operation of the equipment. The use of the intelligent control system of the engine room brings benefits such as energy consumption in the building according to the thermal needs of the building and prevention of excessive energy consumption in the intelligent engine room of the building. By increasing the useful life of the building's central heating system equipment by reducing their operating time, smart building increases the thermal comfort level of the residents and improves the quality of life in the building.

In buildings that are not used continuously, to prevent energy loss, the energy-consuming equipment in the central heating system should be turned off or put in standby mode on the days when the building is closed. The smart engine house system provides the possibility for the building to control the operation of the equipment with prior planning during the holidays.
Recording the operation of the engine room equipment at different time intervals is also very useful for checking the periodic performance of the smart engine room.
The operation of smart engine room equipment can be programmed on a daily, weekly, and monthly basis. In traditional engine houses, boiler temperature control is done through thermostats installed on pumps and boilers, and the water temperature of the building at any moment depends on the internal and external factors of the building, such as the temperature of the outside environment and the conditions inside the building. In the spring or autumn seasons when the temperature changes are more severe, residents feel hot or cold, so to keep the temperature of the building constant, the water circulation temperature of the boiler must be changed momentarily based on the mentioned parameters.

How the smart engine room works

Boiler water (water movement inside radiators, fan coils, etc.) is adjusted instantaneously by controlling the circulation pump based on the needs of the building and stabilizing the temperature inside the building, increasing the heat and reducing the depreciation of the engine room equipment due to the duration of the operation.
In the smart engine room system, there is an anti-freeze program when the residents and consumers are not present in the building, and if the temperature outside the building drops too much, by setting the boiler temperature to 40 degrees Celsius and turning on the engine room circulation pumps in The standby mode is set and the problem of pipe bursting is avoided.
Optimizing fuel and energy consumption by intelligent engine room control systems is based on heating control from the source and place of heat energy production in the engine room.
The smart engine room system receives information from thermal sensors that are installed in the following places:

• on the north side of the building (measuring the ambient temperature outside the building)
• Spa boiler output (rotary spa temperature measurement)
• The entrance of the spa boiler (measuring the temperature of the rotary spa)

The consumption of the spa (measuring the temperature of the sanitary spa) is installed to be sent to the intelligent control system.

Application of intelligent heating engine room

Among the main reasons that cause energy wastage in the central heating system of buildings without a smart home engine, the following can be mentioned:

• Incorrect adjustment and low efficiency of the burner
• Inadequacy of the heat capacity of the boiler with the burner
• The presence of deposits inside the blades of the boiler
• Improper chimney and wrong piping design
• Incorrect adjustment of the thermostat
• Failure to control equipment performance
• Non-compliance of the thermal capacity of the engine room with the thermal load of the building
• Failure to insulate the boiler, pipes, and sources of the double-walled or coiled spa

Intelligent building control systems are a suitable alternative to the manual thermostat system in the engine room of the building because they can solve all the mentioned issues with its performance.

 DamaTajhiz; The best prices and brands of construction equipment 

Advantages of the smart heating engine room

• Heating control from the origin and place of heat production
• Designed based on the native-climatic conditions of the country and by the culture of energy consumption in Iran
• Reducing costs and saving fuel consumption by up to 40% in non-residential buildings and up to 15% in residential buildings
• The most effective method of optimizing energy consumption in buildings with the shortest cost recovery time is based on the approval of the country's fuel consumption optimization organization
• The effective duration of the optimization period is 12 months of the year
• Reducing environmental pollutants and social costs
• The ability to adapt and control the perfect environment along with recording the thermal comfort range according to the temperature changes outside the building
• Heating and hot water temperature control in real-time and during the day and night hours

You can also read the article IMPORTANT POINTS IN THE FLOOR HEATING SYSTEM for more information.

Final speech

The specialized collection (Damatajhiz) (the first and most reliable authority in the country in the field of building facilities equipment and all air conditioning devices), offers you all kinds of sand filters and hundreds of other products, guaranteeing the originality of the product, valid warranty, and reasonable price. In addition, if you have any questions about choosing and comparing the brands of this product, you can get free advice from the heating equipment experts.

In Iran, the first and most famous specialized group in the field of building installation equipment, air conditioners, and all equipment for swimming pools, saunas, and jacuzzis since 2004, DamaTajhiz is a specialized group. Refer to the time of this group. For more information, you can get advice from the experts of DamaTajhiz Engineering and Production Company by calling 021-88822550.

Related Articles

THE BEST SELLING BUTANE CENTRAL HEATING BOILER MODEL

THE DIFFERENCE BETWEEN THE GROUND PACKAGE AND THE HOT WATER BOILER
THE CAUSE OF THE HOLE IN THE HEATING RADIATOR
ADVISE TO CHOOSING AND PURCHASING A CENTRAL HEATING BOILER

We are waiting for your call and look forward to meeting you at the DAMATAJHIZ group

By sharing the above article on social networks, let your friends know about its important content.