DatisKar Steam Unit Heater Equipped with Two-Speed Motor

Purchasing Guide for DatisKar Steam Unit Heater Equipped with Two-Speed Motor

1. Quantities of heat generated by DatisKar steam unit heaters are based on steam pressure PSI 30 or (2 loads) that quantities of heat generation in pressure PSI 5 and PSI 15 will be lower.
2. Quantities of heat generated by the above two-speed unit heaters is proper with motor speed 1400 and heat generation of system is reduced in motor speed 900.
3. Shell of DatisKar Unit Heaters is made of steel and Type ST37 with suitable thickness and electrostatic powder coating.
4. DatisKar Unit Heaters are equipped with copper coil or Mannesmann for 8.5 inches with fin plate and 8-fin condensation per inch.
5. DatisKar steam unit heaters coil passed hydraulic test under 6 bar pressure after production. Blades used in production of fan aeration fan of DatisKar Steam Unit Heaters as per capacity and aeration pressure may be of propeller or centrifuge types.
6. Electromotor used in the above Unit Heaters is based on mono-phase and triple-phase capacity and is Motogen or blower (Ilka plan)
7. DatisKar Steam Unit Heaters are provided with 2-years of warranty.

The points should be taken into consideration after purchasing DatisKar Steam Unit Heater

• In steam unit heaters, steam pipe is connected to the top of unit heater.