Garmasun Industrial Radiant Heater MR-50U

INDUSTRIAL RADIATION HEATER MR-50U PURCHASE GUIDE

Garmasun industrial radiation heater MR-50U using heat radiation method for use in environments such as sports and industrial halls, large greenhouses, sheds, and workshops with an area of ​​160 to 200 square meters and a height of 5 to 6 meters is very suitable Is. The radiant heater of Garmasun, like the sun, distributes the necessary heat evenly throughout the environment and prevents the condensation of heat in a part of the space.

The use of ceramic elements causes a uniform distribution of heat; Using the radiation method to create heating, up to 60% in fuel consumption and 90% in electricity consumption are saved.

FEATURES OF GARMASUN INDUSTRIAL RADIATION HEATER MR-50U

• By installing the MR-50U model, the useful space of the hall will not be occupied.
• These ceramic radiant heaters generate the necessary heat in the environment in the shortest possible time.
• The heating function of these heaters is such that even if the doors of sports or industrial halls are open, the desired heat is provided.
• The combustion efficiency of Garmasun industrial radiant heaters is over 92% and all environmental standards have been observed in the manufacture of these products.
• In addition, if you choose the above heaters to create the necessary heating in large spaces, you do not need any engine room facilities such as boilers, burners, plumbing, heater units, circulator pumps, etc.
• In general, because heat moves from the bottom to the top of enclosed spaces, Garmasun industrial heaters focus on heating the floor (initially) but then distribute the heat evenly (in environments with high ceilings). ) Scatter.

Before installing Garmasun Industrial Radiant Heater MR-50U, pay attention to the following points

• The nominal gas pressure of this model of radiant heater for optimal operation is 15 to 30 mBar.
• Gas extraction operation should be done after installing the heater and observing the standards of gas management.
• Electricity consumption of Garmasun industrial radiant heaters is single phase and the cable consumption should be 1.5 x 3 mm.
• Be sure to note that the maximum branch distance of the inlet gas pipe of the device should be 1/5 meter and the size of the pipes should be at least 1/4 of 1 inch.
• It is recommended to use a 2-pound exhaust system using a 2-pound regulator in the main path and a stabilizer for each product to achieve the desired performance of these heaters.

FREE ACCESSORIES FOR GARMASUN INDUSTRIAL RADIANT HEATER MR-50U

• Electrical panel
• Gas stabilizer
• Miniature key
• Installation chains and fittings
• Electric burner protector
• Brushed gas hose with nuts and tubes

WARRANTY AND AFTER-SALES SERVICES OF GARMASUN INDUSTRIAL RADIANT HEATER MR-50U

The above products have a 3-year warranty and 15-year after-sales service.

In the reference and shopping website, Damatajhiz, the technical specifications and guaranteed radiant heater price, with the main guarantee, have been provided for dear customers to create a good feeling of optimal and smart purchase.