-
Account
-
-
Shopping Cart
Cart is empty.
- Out-of-Stock
Iran Radiator Low consumption Gas-fuel GMG-85
- Maximum heating power: 85.000 Kcal / hr
- Fuel consumption: natural gas and LPG
- Combustion mode: one stage
- Flame tube diameter: 11.5 cm
- Optimal performance with low gas pressure
Warranty :
1 year Iran Radiator warrantyAfter-sale Services :
10 yearsGuide to Choose and Buy Iran Radiator Low consumption Gas-fuel GMG-85
Iran Radiator Company is one of the most well-known brands active in the production of heating equipment. This company entered the field of burner manufacturing in the mid-1991s, which features good technical quality and excellent after-sales service from Iran Company.
Iran Radiator gas burner works with city natural gas fuel and needs appropriate gas pressure based on capacity and heat capacity. Iran Radiator household gas burners are required and suitable to operate at a pressure of 1.4 pounds or 17.5 millibars and a pressure of 2 pounds or 140 millibars at higher capacities.
Iran Radiator gas burner in its product list has introduced 3 models of home gas burners with different capacities that have low gas consumption, very low noise, easy service and maintenance, high thermal efficiency (14% savings compared to models with the same capacity) Of course, this model of gas burners are produced under the license of the German company Reisler in Iran Radiator.
Iran Radiator Low consumption Gas-fuel GMG-85 with a heat capacity of 85,000 kcal per hour is produced as a small model. Iran Radiator Low consumption Gas-fuel GMG-85 has a different appearance and dimensions than other gas burners.
According to the Iranian Scientific and Industrial Research Organization, this burner has 14% lower fuel consumption than the current burners in the Iranian market.
Features of Iran Radiator Low consumption Gas-fuel GMG-85
- Very quiet
- Straightforward service and maintenance
- Optimal performance with low gas pressure
- Ability to work with natural gas and LPG
- It has LOW EXCESS AIR technology
- It has partial pre-mixing technology and branch flame
- Full flame stability in all burner operation modes (due to flame retardant)
- When choosing a burner, pay attention to the diameter of the burner flame tube to allow the above pipe to enter the boiler and install the burner.
- Maximum efficiency in steel and cast iron boilers (due to the presence of a six-branch flame and the use of blowers with high static pressure)
- Iran Radiator Company fully supports its products by having more than 1000 authorized after-sales service centres throughout the country.
- A low-consumption gas-fuel radiator for Iran is produced under a license in Germany by Dreisler. It is mandatory to install a gas filter on the inlet gas pipe to the gas burners.
Performance of Iran Radiator Low consumption Gas-fuel GMG-85
- Based on its capacity, the inlet airflow is controlled by an air damper installed in the burner body either manually or by a motor.
- Gas burners can be classified into types with blower or fan and also types without blower (without sound). The burners used in apartment packages are of gas type without blower and sound.
- A gas burner is designed to combustion natural gas, and the volume or flow of gas fuel required in these burners, after passing through the gas filter, is controlled by the solenoid valve. A blower installed on the engine shaft provides the necessary air for their combustion.
- The gas stream passes through a filter, mixes with combustion air, and is ready for combustion. If the combustion air pressure is too low or the gas pressure is too high or too low, this is detected by the built-in pressure sensors, and the relay command will turn the burner off based on the pressure of the air and gas switches.
Adjust the fuel and air of the burner
- By fine-tuning the ratio of fuel to air, complete combustion is achieved. The more accurately this ratio is adjusted, the higher the burner combustion efficiency, and therefore, less energy is required. In small burners, the adjustment of the required air for combustion of the burner is done by a manual damper, but in large burners, this adjustment is provided by an automatic damper for the required combustion air. However, because the air temperature of the engine room boiler and its humidity varies throughout the year, the air damper must be readjusted each season in large burners. Today, modern burners are equipped with an intelligent PLC control system that automatically adjusts the ratio between fuel and air throughout the day and all seasons.
Because of the incomplete combustion efficiency of fuel in burners, and considering some heat losses, when choosing a burner, we consider the burner capacity to be about 20% greater than the boiler capacity.
- The Thermal value of each cubic meter of natural gas is approximately equal to 9200 K.cal.
- For every 300 meters increase in height from the surface of the door or due to a decrease in air concentration, the fuel combustion efficiency of all types of burners is reduced by about 4%.
In DamaTajhiz's reference and store site, buyers can find technical information and burner prices that include original warranties to help them make an informed, optimized purchase decision.