Gplus Inverter Ducted Split 24000 BTU GCD-24KN6HR3

Gplus Inverter Ducted Split GCD-24KN6HR3 Selection and Purchase Guide

Gplus Inverter Ducted Split GCD-24KN6HR3 is one of the newest models in the air ventilator market, produced by Goldiran company under the Gplus brand, supplied the domestic markets, and exported to the middle east.

Goldiran Company produces built-in ceiling ducted split G-Plus products based on modern world standards and using advanced machines and quality primary parts in capacities of 2 to 5 tons of refrigeration. G-Plus built-in ceiling ducted split with compact design can be installed in low height false ceilings.

Inverter Ducted Split G Plus-GCD-24KN6HR3 is one of the models of Ducted Split G Plus that with a capacity of 2 tons of refrigeration is suitable for areas up to 50 square meters.

On the reference and shopping website of Damatajhiz, the technical specifications and guaranteed prices of all types of G-Plus built-in ceiling ducted splits, with the original guarantee, have been provided for dear customers to get a good feeling of optimal and smart purchases.

Features of G-Plus Inverter Ducted Split GCD-24KN6HR3

• G-Plus built-in ceiling ducted splits have the ability to control external static pressure. This feature easily adjusts the air volume via the remote control. The BLDC motor can control fan speed and air volume regardless of external static pressure. This way, no additional equipment is needed to control the airflow.
• GPlus duct splits have an inverter compressor that maximizes energy savings by adjusting power consumption according to the device's needs. This product has an A + energy rating.
• Benefits from environmentally friendly R410a refrigerant gas.
• The outdoor unit of inverter ducted split G-Plus is equipped with 2 pressure and temperature control sensors.
• These devices use a corrosion-resistant heat exchanger of the Blue Fin type. The bluefins are made of aluminum and are equipped with a blue coating, which makes the aluminum coil metal resistant to corrosion. This feature makes GPlus ducted splits suitable for areas with acidic and alkaline air.
• With the possibility of long piping between the indoor and outdoor 2-ton refrigerant ducted split of GPlus (15 meters in height and a total of 25 meters).
• Gplus inverter ducted split GCD-24KN6HR3 has the ability to connect to a hot water coil to provide hot air in the cold seasons.
• With a wide temperature operating range from -15 to +24 degrees Celsius in heating mode and 10 to 55 degrees Celsius in cooling mode.
• Equipped with digital remote control

Determining the capacity and installing the GPlus ducted split

In order to determine the capacity and number of GPlus ducts required by the project, first, send the latest architectural plan of your building units and floors to our experts via fax or email.

Usually when initially estimating the cooling capacity of duct split required for each apartment in climatic conditions such as Tehran and in the middle floors of the building (which are not exposed to sunlight on the roof in summer and the cold of the roof in winter), for every 30 or 40 The total gross area of ​​the apartment is considered to be about one ton of refrigeration (duct split capacity) (per square meter of usable space is about 400 BTU / hr). Therefore, if the area of ​​each of your apartment units is more than 120 square meters, it is better to use two duct split units for each unit. Also, keep in mind that each 12000 BTU is equivalent to one ton of refrigeration.
For apartments up to 150 square meters, single-phase duct splits can be used, but with 32 amp power (some brands), and there is no need to request three-phase electricity (from the electricity company).
If your apartment units are even up to 200 square meters, you can use single-phase duct splits using single-phase electricity but 50 amps.
According to what our experts have heard, the builders are obliged to obtain three-phase electricity for units higher than 200 square meters according to Tavanir Company's directive.
One of the important points in choosing duct splits is to consider their aeration volume, which is usually suitable for each ton of duct split capacity equal to CFM 400 aeration volume. Obviously, if the volume of aeration is less, the volume of duct split will be less and if there is more aeration, the volume of duct split will be more.
For more convenience, you can also refer to the following approximate calculation table to determine the required duct split capacity, according to the conditions and basics of the above calculations: