Damatajhiz

Alt radiator radiator Alt cooling tower Alt air handling unit (ahu) air handling unit (ahu)
  • Out-of-Stock
  • Chauffagekar Gas-fuel Burner CKI-G88
  • Chauffagekar Gas-fuel Burner CKI-G88

Chauffagekar Gas-fuel Burner CKI-G88

حداكثر ظرفيت حرارتي: 88.000 Kcal/hr سوخت مصرفی: گاز طبیعی نحوه احتراق: یک مرحله ای برق مصرفی: تکفاز قطر لوله شعله پوش: 80 ميلي متر
  • Maximum heat capacity: 88,000 Kcal/hr
  • Fuel consumption: natural gas
  • Combustion mode: one stage
  • Power consumption: single phase
  • Diameter of the flame cover pipe: 80 mm

Warranty :

1 year Iran Radiator warranty

After-sale Services :

10 years

inquiry

پرداخت اقساطی

مجموعه دمـاتجهیــز امکان خرید اقساطی کالاهای سایت را فراهم نموده است. فرایند خرید اقساطی از این روش طی مدت ۱۰ الی ۱۵ روز انجام می شود و...
اطلاعات بیشتر و ثبت سفارش >
0
New
View all products of شوفاژکار

Guide to choosing and buying a CKI-G88 model gas burner

CKI-G88 model gas burner is a tool that converts fossil fuel energy into thermal energy by combining fuel and air and igniting this mixture. CKI-G88 model gas burner has a maximum heat capacity of 88,000 kilocalories per hour. Chauffagekar company is one of the most well-known brands active in the production and supply of heating equipment in the country's industries and exports to all parts of the world. In previous years, cast iron heating boilers were sold alone, and buyers used to prepare a burner separately to equip their boilers for use. However, choosing two related products unprofessionally leads to damage to the boiler, burner, or both. In order to solve this problem, Chauffagekar Industrial Company decided to choose the boiler standard with a burner and supply two products at the same time. The benefits of choosing a standard boiler and burner include reducing pollutants caused by combustion, increasing thermal efficiency, and reducing energy consumption.

Features of gas burner model CKI-G88

  • When choosing the CKI-G88 model gas burner, pay attention to the diameter of the flame tube to allow the tube to enter the boiler and install the burner.
  • In general, when using a CKI-G88 model gas burner, in addition to the need to pay attention to the type of burner fuel, it is necessary to consider the capacity of the burner about 20% more than the capacity of the boiler or the combustion chamber of the heater for various reasons.
  • If the pressure of the gas supply line for the burner is 2 pounds, it is necessary to use a balancer to adjust and balance the small changes in the gas pressure of the gas burner with the required size and flow rate of the burner gas at the beginning of the gas line. Also, if the burner gas pressure is higher than 2 pounds (15 or 30 to a maximum of 60 pounds), it is necessary to install a gas regulator with the appropriate size, working pressure and gas flow at the beginning of the burner gas line.
  • Installing a gas filter with the right size and working pressure after the quarter-round gas valve and before the gas regulator and the electric shock or gradual burner gas valves is one of the first pieces of equipment required for the gas line in gas burners.
  • It has an integrated body
  • It has an electric motor with a power of 100 watts
  • The mode of combustion is single-stage.
  • No electrical panel
  • It has a control relay, manual air damper, electric valve, air, and gas compressor
  • It has an ionization rod type flame monitoring system
  • The gas burner is suitable for Chauffagekar models Super 300-5 to 9 blades, Solar 300-5 to 10 blades, Super 200-5 to 8 blades and Azarakhsh 5 to 9 blades Chauffagekar package.

Gas burner model 88

Chauffagekar burner Gas burner performance

  • The inlet air flow rate is manually controlled by the air damper installed in the burner body, based on its capacity.
  • In terms of performance, gas burners are divided into types with a blower or fan, as well as types without a fan (no sound). The burners used in apartment packages are gas burners without blower and silent.
  • The gas burner is designed for natural gas combustion, and the gas required for combustion in these burners, after passing through the gas filter, is controlled by an electric valve, and the air required for their combustion is provided by a blower installed on the engine shaft.
  • The gas stream passes through a filter, mixes with combustion air, and is ready for combustion. If the combustion air pressure is lower than a certain limit or the gas pressure is higher or lower than the desired value, this issue is sensed by the built-in pressure sensors and the burner is turned off by pressing the air and gas switches through the relay command.

The importance of adjusting the fuel and air of the gas burner

The complete combustion of the fuel is the result of the precise adjustment of the fuel-air ratio. The more accurately this ratio is set, the higher the combustion efficiency and, as a result, less fuel is needed. In small burners, the air required for combustion is adjusted by a manual damper, but in large burners, this adjustment is provided with the help of an automatic damper. Of course, due to the fact that the air temperature of the engine room boiler and its humidity varies throughout the year, in large burners, the air damper must be reset every season. Today, modern burners are equipped with an intelligent PLC control system that automatically adjusts the ratio between fuel and air throughout the day and night and all seasons of the year.

Due to the incompleteness of fuel combustion efficiency in burners and taking into account some heat losses, when choosing a burner, we consider the capacity of the burner to be about 20% more than the capacity of the boiler.

  • The calorific value of each liter of diesel is approximately equivalent to K.cal 8500.
  • The calorific value of each kilogram of diesel is approximately equivalent to 10500 K.cal.
  • The calorific value of each cubic meter of natural gas is approximately equivalent to 9200 K.cal.
  • For every 300 meters increase in height from the surface or due to the decrease in air concentration, the fuel combustion efficiency of all types of burners decreases by about 4%.

The components of Chauffagekar burner

  • Gas pressure switch: used to control gas operation.
  • Air pressure switch: It is used to control the airflow necessary for ignition.
  • Control relay: This part is responsible for controlling the work of the burner in such a way that by monitoring the pilot burners and by coordinating the different steps until the main flame occurs, it gives a warning in case of any problem.
  • Air adjustment damper: to adjust the intake air for combustion
  • Spark transformer: The task of this part is to create a spark in the burner of the heater and as a result, to create ignition.

Warranty of CKI-G88 Chauffagekar burner

Chauffagekar model CKI-G88 gas burner has 1 year warranty of Chauffagekar company.

On the Dematjahir website, you can find and buy the burner that is suitable for your environment. 

لیست نظرات

Shopping Cart

Cart is empty.

Account

Account

Menu
No account?
Create an Account