Chauffagekar cast iron boiler Super 200 with 7 Blades

Guide for selecting and buying a super 200 cast iron boiler with 7 blades

Chauffagekar Super 200 cast iron boiler with 7 blades and having high thermal efficiency and small dimensions are very suitable for use in small and medium buildings with a useful area of 500 square meters.

In the reference site and Damatajhiz store, technical information and guaranteed prices of various types of cast iron boilers, with the main guarantee, have been provided for you to enjoy a good sense of optimal and smart purchase.

Features of Super 200 cast iron boiler with blades

• Super 200 cast iron boilers are produced in the form of blades (4 to 8 blades) and in addition to city gas, they can also work with gasoline.
• The maximum working pressure in the cast iron boiler of the Super 200 model is equal to 4 bar and the maximum working temperature in these boilers is 90 degrees Celsius.
• The heating capacity of cast iron boilers of Super 200 is suitable for small buildings with a useful area of ​​up to 500 square meters, and if several cast iron boilers of the Super 200 model are installed, the operated area can be increased.
• Super 200 boilers take up little space in the engine room and can be easily coupled to a cycle with a solar collector through a single coil and double wall sources with dual coil sources. Due to the shape of the combustion chamber and smoke passes, this boiler is compatible with all burners with suitable heat capacity.
• Installing several Super 200 boilers can increase the area used. Also, the idea of ​​installing several boilers is one of the principles of energy optimization and always consumes less fuel than a large boiler.
• The operation of this boiler is guaranteed for 10 years, and this warranty is unconditional if installed correctly, and the damaged blades will be replaced.
• Super 200 boiler cast iron boilers are made of refractory cast iron alloy and are resistant to oxidation and chemical agents affecting the surface, as well as environmental factors such as humidity and condensate from combustion.
• Cast iron boilers of the Super 200 model have high heat transfer efficiency because the body of these boilers with a thickness of 5 mm cast iron is covered by prominent fines, which increases the mechanical strength of the boiler and also increases the heat level and ultimately increases the heat transfer efficiency in the boiler. The working pressure of the boiler for use in the engine room is equal to 4 atmospheres.

To see more information to purchase cast iron boiler model Super 200, click on the technical specifications on this page.

Advantages of cast iron Boilers with blades over Integrated Steel Boilers

• More reasonable price and proper warranty compared to standard steel boilers
• Possibility of replacing damaged blades and easy repair compared to integrated steel boilers
• Its smaller size and easy relocation due to the possibility of separating the blades

Calculating capacity and installing the Chauffagekar Super 200-7 Cast-Iron Boiler

• Dimensions and price provided for the above boiler with hood are considered.
• The most important point in using cast iron boilers is the limitation of working pressure and the need to seal the bushing between the blades of the cast iron boiler after installation.
• To calculate the capacity of the required cast iron boiler based on the number of units, area, and type of use of the building, the presence or absence of a hot water pool, etc., you can consult with the experts of Damatjahiz Company.
• It is also necessary to install a submersible thermostat (submersible August) with a temperature range of 30 to 90 ° C (or 30 to 110 ° C) to adjust the boiler temperature and the off-on command to the burner relay on each cast iron boiler.
• It is necessary to install a manometer thermometer to display the hot water temperature in the boiler as well as the pressure of the building heating system on each cast iron boiler of the home engine boiler.
• Since the installation of all the main equipment of the engine room, including the central heating boiler on the pre-executed concrete foundation with appropriate dimensions according to the location plan and exactly where the equipment is located, before installing the main equipment of the engine room, including the Cast iron boiler Install the required concrete foundation according to the defined dimensions and standards.
• To calculate the approximate heating capacity of the required cast iron boiler, first, multiply the useful floor area of ​​the building by 100 (kcal) and then add 6000 (kcal) for each residential unit to provide the hot water consumption. For example, for a building with an area of ​​1000 square meters, useful infrastructure, and 10 apartment units, the required heating power of the boiler is: 160,000 kcal = (10 × 6000) + (100 × 1000)

Minimum equipment required for a simple engine room

• Torch (type of fuel?)
• Aquastat submerged pot
• Warm water source (coil or double-wall?)
• One-inch flange pump for warm water return
• Manometer thermometer (installed on the boiler)
• Engine room electrical panel (with at least 5 buttons)
• Expansion source (galvanized or aluminum?)
• Warm water return pump (usually linear pump "1)
• Expansion source float (with metal or plastic hub?)
• Temperature and pressure assurance valve "1 (installation on hot water source)
• Wall aquastat (operation command to the circulator pump)
• Engine room central heating boiler (cast iron boiler or steel boiler?)
• Gas burner hose and filter in the right size (or gasoline nozzle and filter for gasoline burner)
• Linear circulator pump (usually 2 inches HV or 2 inches AA or 2 inches A6 or 2 inches A7 or ... based on area)

Warranty of Chauffagekar Super 200 7-blade cast iron boiler

Chauffagekar Super 200 cast iron boiler with 7 blades, like other products of Chauffagekar company, in addition to a 10-year warranty, enjoys the technical support and extensive after-sales service of this company throughout the country.