Chauffagekar Cast-iron Boiler Super 200 - 4 blades

Guide for choosing and buying a Chauffagekar Cast-iron Boiler Super 200 - 4 blades

Super 200 cast iron boiler with 4 blades with high thermal efficiency and small dimensions is very suitable for use in small and medium buildings with a useful area of 500 square meters.
In the store and reference site Damatajhiz, technical information and guaranteed prices of cast iron boilers, with the main guarantee, are provided for you to enjoy a good sense of optimal and smart purchase.

Features of Chauffagekar Cast-iron Boiler Super 200 - 4 blades

• Super 200 cast iron boiler is produced in the form of blades (4 to 8 blades) and in addition to city gas, they can also work with diesel fuel.
• The maximum working pressure in the cast iron boiler of the Super 200 model is equal to 4 times and the maximum working temperature in these boilers is 90 degrees Celsius.
• The heating capacity of cast iron boilers of Super 200 is suitable for small buildings with a useful area of ​​up to 500 square meters, and if several cast iron boilers of the Super 200 model are installed, the operated area can be increased.
• Super 200 boilers take up little space in the engine room and can be easily coupled to a cycle with a solar collector through the single coil and double wall sources with dual coil sources. Due to the shape of the combustion chamber and smoke passes, this boiler is compatible with all burners with suitable heat capacity.
• Installing several Super 200 boilers can increase the area used. Also, the idea of ​​installing several boilers is one of the principles of energy optimization and always consumes less fuel than a large boiler.
• The operation of this boiler is guaranteed for 10 years, and this warranty is unconditional if installed correctly, and the damaged blades will be replaced.
• Super 200 boiler cast iron boilers are made of refractory cast iron alloy and are resistant to oxidation and chemical agents affecting the surface, as well as environmental factors such as humidity and condensate from combustion.
• Cast iron boilers of the Super 200 model have high heat transfer efficiency because the body of these boilers with a thickness of 5 mm cast iron is covered by prominent fines, which increases the mechanical strength of the boiler and also increases the heat level and ultimately increases the heat transfer efficiency in the boiler. The working pressure of the boiler for use in the engine room is equal to 4 atmospheres.
• To see more information to buy cast iron boiler model Super 200, click on the technical specifications on this page.

Advantages of cast iron boilers over integrated steel boilers

• Suitable price and guarantee for cast iron boilers compared to steel boilers
• Smaller cast iron boiler dimensions and easy transportation due to the possibility of separating the boiler blades from each other
• Possibility of replacing damaged blades of cast iron boilers and easy repair of boilers compared to integrated steel boilers

Calculation of capacity and installation of Super Model 200 cast iron boiler

• Dimensions and price of cast iron boiler products provided for the above boiler are considered with the hood.
• The most important point in using cast iron boilers is the limitation of working pressure and the need to seal the bushing between the blades of the cast iron boiler after installation.
• It is necessary to install a manometer thermometer to display the hot water temperature in the boiler as well as the pressure of the building heating system on each cast iron boiler of the home engine boiler.
• To calculate the capacity of the required cast iron hot water boiler based on the number of units, area, and type of use of the building, the presence or absence of a hot water pool, etc., you can consult with the experts of Damatajhiz Company.
• It is also necessary to install a submersible thermostat (submersible August) with a temperature range of 30 to 90 ° C (or 30 to 110 ° C) to adjust the boiler temperature and the off-on command to the burner relay on each cast iron boiler.
• Since the installation of all the main equipment of the engine room, including the central heating boiler on the pre-executed concrete foundation with appropriate dimensions according to the location plan and exactly where the equipment is located, before installing the main equipment of the engine room, including the boiler Cast iron Install the required concrete foundation according to the defined dimensions and standards.
• To calculate the approximate heating capacity of the required cast iron boiler, first, multiply the area of ​​the useful infrastructure of the building by 100 (kcal) and then add 6000 (kcal) for each residential unit to supply the hot water consumption. For example, for a building with an area of ​​1000 square meters, useful infrastructure, and 10 apartment units, the required heating power of the boiler is: 160,000 kcal = (10 × 6000) + (100 × 1000)

Minimum equipment required for a simple engine room

• Torch (fuel type?)
• Aquastat submerged pot
• Spa source (coil or double-wall?)
• One inch flange pump back spa
• Manometer thermometer (installed on the boiler)
• Engine room electrical panel (at least 5 kg)
• Expansion source (galvanized or aluminum?)
• Spa return pump (usually linear pump "1)
• Expansion source float (with metal or plastic hub?)
• Temperature and pressure relief valve "1 (installation on hot water source)
• Wall Aquastat (operation command to the circulator pump)
• Engine room central heating boiler (cast iron boiler or steel boiler?)
• Gas burner hose and filter in the right size (or gasoline nozzle and filter for gasoline burner)
• Linear circulator pump (usually 2 inches HV or 2 inches AA or 2 inches A6 or 2 inches A7 or ... based on area)

Warranty of cast iron boiler Super 200 4-blade boiler

Super 200 cast iron boiler with 4 blades, like other products of Chauffagekar company, in addition to a 10-year warranty, enjoys the technical support and extensive after-sales service of this company throughout the country.