-
Account
-
Shopping Cart
Cart is empty.
- On sale!
DamaTajhiz Ducted Fan Coil Unit DT.DFC800
- Power consumption:220V single phase
- maximum used infrastructure: 56 m2 (depending on the conditions)
- Dimensions (H , W , L): 48.5*65*90 cm
- High heating capacity with four-row coil
- Three standard speeds with low noise
- Equipped with galvanized distillation pan
- Reliable work pressure: 8 bar
- Washable and high durable filter with easy installation and replacement
Pre-sale Services :
Engineering consultingCalculating and Determining the capacity
Warranty and after-sale Services :
18 months DamaTajhiz golden warranty + 20 years of technical supportPurchase Guide for DamaTajhiz Ducted Fan Coil Unit DT.DFC800
DamaTajhiz Ducted Fan Coil Unit DT.DFC800 is manufactured with 800 CFM of aeration capacity under technical principles and common standards for construction projects, and large and public buildings.7
Technical Specifications of DamaTajhiz Ducted Fan Coil Unit DT.DFC800
Specifications of DamaTajhiz Fan Coil Unit
- DamaTajhiz Ducted Fan Coil Unit DT.DFC800 has three-row aluminum and copper coils (with 8 tubes in each row), each with 8.3 inches of diameter and 12 FPI of distance from each other.
- DamaTajhiz coils are manufactured with the most advanced fully automatic machines and have larger heat exchange surfaces compared to other coils due to using sophisticated Fin Plate technology.
- Copper tubes are mechanically integrated onto staggered sinusoidal aluminum plate fins by the Expander machine to eliminate distances between fins and copper tubes.
- After being manufactured, all coils are degreased with a degreasing solution and tested at 200 PSI of pressure.
- THE reliable operating pressure for DamaTajhiz Fan Coil Unit is 8 bar and suitable for buildings with up to 20 floors.
Specifications of Fan and Electro Motor
DamaTajhiz ducted fan coils are equipped with forwarding centrifugal fans with German EBM design, an external rotor motor with a forwarding fan (dual-side suction) at three speeds (variable rpm), static and dynamic balance, and minimum noise levels, made of hot-dip galvanized sheets fitted with single-phase anti-vibration rubber seals.
Frame Specifications
DamaTajhiz ducted fan coil case is entirely made of hot-dip galvanized sheets with sufficient thickness, held together with bolts and nuts which allow easy reassembly and treated with a coat of electrostatic polyester powder paint.
Insulation
The device is insulated with a glued back compressed Airo Flex insulator (3mm thick compressed polyethylene) to prevent heat loss and cold and reduce device noise.
Filtering
An aluminum plate and washable filter can eliminate particles in the air, given the filtering type. In these filters, grid sheets are put on each other.
Distillation Pan
Galvanized distillation pan with a proper slope to direct distilled water from coil surface in warm seasons. To prevent decay, the distillation pan is coated with epoxy powder coating.
Electric
The Internal cabling is done by the company, and the terminals mounted on the outside of the case are ready to be connected to the power from the electric switchboard.
Determination of DamaTajhiz Fan Coil Units Capacity
One of the most important things in selecting fan coil units is to determine their capacities. For this purpose, you can use the following approximated table:
Fan Coil Capacity | Max Used Infrastructure |
800 | To 56 Square meters |
1000 | To 70 Square meters |
1200 | To 80 Square meters |
1400 | To 95 Square meters |
1600 | To 110 Square meters |
1800 | To 120 Square meters |
2000 | To 140 Square meters |
Warranty and After-sale Services for DamaTajhiz Ducted Fan Coil Unit DT.DFC800
DamaTajhiz Ducted Fan Coil Unit DT.DFC800 has 18 months of warranty along with 20 years of after-sale services from DamaTajhiz Company.
Check out more models, compare them, and buy Fan Coil Unit systems online with the best warranty and after-sale services.
Model |
DT.DFC800 |
|
Device installation location | built-in ceiling | |
Aeration capacity (CFM) | 800 | |
coil specifictions | Number of rows | 4 |
Copper Pipe Size (inch) | 3/8″ | |
Fin per inch (Fpi) | 12 | |
cooling capacity | Total cooling capacity (BTU/hr) | - |
Water flow (GPM) | - | |
heating | Total heating capacity (BTU/hr) | - |
Water flow (GPM) | - | |
engine | number | - |
power(W) | - | |
Current (A) | - | |
Dimensions (cm) | height | 90 |
weight | 65 | |
Height | 32 | |
Inlet pipe size - inches | "1 | |
outlet pipe size - inches | "3/4 | |