Butane Radiator 7 pipes Il Primo 500

Purchasing Guide for Butane Radiator

1. The highest heat power of each blade and as a result, need to lower blades
2. The highest resistance against corrosion and minimum bleeding due to interior protection coating
3. Balancing of 100% blades due to production of robotic
4. Automatic Test of 100% of radiators
5. Triple phase process of radiator color with paint coating for quality assurance and resistance
6. A full-automatic assembly line of the radiator with fully-distinguished quality of the weld
7. Compatible with all kinds of heating systems: wall-mounted package, central powerhouse, solar systems, condensation boiler, all kinds of thermostats and timers
8. Beautiful, durable costing and color steady
9. Easiness and speed of installation
10. Diversity in model and number of blades
11. For calculation of the number of aluminum radiator blades required for residential apartments under climatic conditions such as Tehran, consider 90 kilocalories of heating per Sqm. of useful infrastructure at floors constructed in the middle of the building and 110 kilocalories of heating for the last floors. (If you like, you may contact the experts of Dama Tajhiz Co. to estimate the number of required blades)
12. Butane aluminum radiators hold European Quality Standard Sign CE.
13. Work pressure of Butane aluminum radiator equals 6 bars and is provided with a 10-year warranty.
14. Butane aluminum radiators are produced on full die casting basis, it means that each blade of them is produced integrated by aluminum casting on a pressurized basis.
15. ∆T=60° C means 60 CG. the temperature difference between hot water entered to radiator and room air temperature

The points should be considered after purchasing Butane Aluminum Radiators

1.  Devices required for installation of each block of Butane aluminum radiator include:

•  A set of tab and radiator lock knee (You are recommended to provide a more suitable comfortable situation at home or workplace in addition to energy saving by using radiator thermostat tab and adjustment with favorite temperature).
• A radiator bleeding valve
• Radiator wall clips
• A set of left or right bobbin cap and four washers

The expense of installation devices has not been stipulated in the above prices and should be separately purchased. While installing and buying an aluminum radiator, the bottom edge of each radiator block should be located only 10 to 12 Cm. higher than the finished floor of the installation site since radiators fail to heat the space. Do not forget bleed radiators before cooling season after installation and sealing them.