Wall-Mounted Butane Boiler Bita 22

Purchasing Guide for Wall-Mounted Butane Boiler

1. Generally, Central Heating boilers are a system that can be easily installed instead of a wall or land cabinet, and instead of the central powerhouse is able to supply consumable hot water and chiller hot water for each apartment (or villas).
2. Butane Heating boilers with high efficiency have National Iranian Standard and European Quality Mark.
3. For approximate calculation of BTU of Butane boiler required for residential apartments, multiply the area of the apartment by 150 (kilocalories) and area of office buildings by 100 (kilocalories). (For example, you are recommended to use a 21000-kilocalorie boiler for residential apartments with an area of 140 sqm.).
4. Models holding Index KI are of the type of wall-mounted boilers that are not equipped with fan and models holding index KIS are equipped with fan and exhaustion and air intake function in the models is done by a double-wall chimney.
5. Use of fan-run boiler with double-Wall-mounted chimney (Coaxial) which is more confirmed, provides the ground for supplying airflow required for ignition of the boiler by the inner wall of the chimney from outside an apartment and oxygen and wetness of inside an apartment is not reduced.
6. In case the boiler has been installed at open space and or boiler chimney has been constructed in the form of L (L-shaped) (it means part of chimney path has been executed horizontally, use of fan-run boiler for easy passage of smoke and ignition gases is obligatory.
7. Wall-mounted Butane boilers series Calda Venezia are made of mono-exchanger boilers. A dual heat exchanger has been incorporated for supplying hot water and supplying environmental heating.
8. Wall-mounted Butane central heating boiler series Optima, Benessere, Bn324i, and Roma are made of dual exchanger boilers. These boilers are equipped with dual heat exchangers and consumable hot water with the lowest desedimentation rate.
9. Double-exchanger boilers are used under the conditions in which consumed water contains hardness (salts) and or the apartment's area exceeds 120 M.
10. Electricity required for all models of wall-mounted Butane boilers are mono-phase and 220 V. (50 Hz-220v-1 PH)
11. Wall-mounted Butane boilers are equipped with a triple-speed circulator pump with connectivity to chamber thermostat and equipped with advanced electrical and mechanical systems as follows:

• Ionizer systems for protection against inflammation
• Electronic troubleshooting system
• Atmospheric torch equipped with an automatic ignescent system
• Microprocessor control system if machine performance
• Slow Ignition System
• Anti-fluctuation system of consumable hot water
• Automatics Air Intake System.

Wall-mounted Butane boiler, model Roma is equipped with digital LCD for displaying various function situations of the machine, heating circuit water temperature while ordinary performance, consumable hot water temperature while using it, troubleshooting codes in case of making trouble in the system. According to Topic 17 of the National Construction Code (2011) min. area confirmable for installation of the boiler at (office or residential) apartment is 64 Sqm., otherwise, incorporation of fresh air valve for suitable ignition of boiler installation location is obligatory. Gas Fuel Wall-mounted Butane Heating boilers are provided with a 24-month warranty and after-sale services.

The points should be taken into consideration after purchasing Wall-Mounted Butane Boiler

1. After purchasing a central heating boiler, for use of free of charge installation services, and warranty of Butane wall-mounted boilers, contact permissible call Nos. inserted on the carton of the boiler (Please do not open carton before attendance of the authorized after-sale-services agent)
2. According to the safety and technical standards of Gas Co., a separate chimney should be directly executed up to the roof of the building for each Butane Gas-fuel Wall-mounted heating boiler. Using a joint chimney is not permissible
3. Generally, an anti-freezing system in heating boilers is active only when, firstly, the boiler is plugged, secondly, water pressure inside a boiler at least is an atmosphere, thirdly, the boiler is connected to town gas, but however the best option is noninstallation of boiler in the locations where it is impossible to freeze water in the winter
4. head (pressure) of small circulator pump incorporated in all kinds of wall-mounted chiller boilers, the general maximum length of piping from the wall-mounted boiler to the latest location of chiller radiator should not be more than 35 m.