-
Account
-
Shopping Cart
Cart is empty.
Chauffagekar Superheat 1300-13 Cast-Iron Boiler
- Dimensions of the boiler (length, width, height): 2580 * 900 * 1200 mm
- Number of blades: 13
- Maximum working pressure: 6 bar
- Avoids energy loss with complete insulation of the cloak
Chauffagekar Superheat 1300-13 Cast-Iron Boiler Purchase Guide
Chauffagekar cast iron boiler model SuperHeat 1300-13, boilers suitable for use in central heating systems of large buildings that have been widely accepted in the country since the 1380s.
The most important difference between superheat cast iron boilers and star cast iron boilers is that the working pressure of superheat boilers is a maximum of 6 bar and the working pressure of star boilers is a maximum of 10 bar.
Chauffagekar cast iron boilers model SuperHeat 1300-13 are made of fire-resistant cast iron alloy and are produced along with separate blades and are resistant against oxidation and chemical factors affecting the surface as well as environmental factors such as air humidity and condensate from combustion.
To see more models and buy cast iron boiler products click on the link, you can also call and get a professional consultation.
Features of SuperHeat cast iron boiler 1300-13
- Cast iron boilers of SuperHeat Model 1300-13 have a high capability of increasing heat transfer efficiency.
- 1300 Superheat cast iron boilers are made of several blades, so they can be easily transported by elevator or stairs without the need for a crane.
- 1300 SuperHeat cast iron boilers have ISO 9001: 2008 quality management certificate from SGS Switzerland.
- Cast iron boiler model Superheat 1300-13 with the ability to operate up to 60 meters in height in tall buildings up to 15 floors is used to produce sanitary hot water and heat hot water.
- Of course, in the past, consumers had to look for integrated non-cast iron boilers to operate a central heating boiler with a pressure of 6 bar, but now 1300 superheat cast iron boilers can easily withstand a working pressure of 6 bar and a temperature of 105 ° C in this Boilers are tolerable.
Calculating the capacity of the boiler cast iron boiler model SuperHeat 1300-13
- Any change in the final price of 1300 cast iron superheat boilers will be announced at the time of inquiry.
- Dimensions and price provided for the above boiler with hood are considered.
- Usually, after the above calculation, up to 20% is added to the calculated capacity of the engine room hot water boiler as a reliability coefficient.
- The most important point in using a cast iron boiler is the limitation of working pressure and the need to seal the bushings between the blades of the cast iron boiler after installation.
- Installing a manometer thermometer to display the hot water temperature in the boiler and the pressure of the building heating system on each cast iron boiler is necessary.
- To calculate the capacity of the required cast iron hot water boiler based on the number of units, area, and type of use of the building, the presence or absence of a hot water pool, etc., you can consult with the experts of Damatjahiz Company.
- It is also necessary to install a submersible thermostat (submersible aquastat) with a temperature range of 30 to 90 ° C (or 30 to 110 ° C) to adjust the boiler temperature and the off-on command to the burner relay on each cast iron boiler.
- For hospital, hotel, and utility projects, it is necessary to use at least 3 central heating boilers, each of which can supply 75% of the energy required for heating the building, because if even two boilers are out of the circuit for technical reasons, Again, it is possible to provide the necessary heating to the building.
- Because the installation of all the main equipment of the engine room, including the central heating boiler on the pre-executed concrete foundation with appropriate dimensions according to the location plan and exactly where the equipment is located, before installing the main equipment of the engine room, including the Cast iron boiler Install the required concrete foundation according to the defined dimensions and standards.
- To calculate the approximate strength of the required cast iron boiler, first, multiply the area of the useful infrastructure of the building by 100 (kcal) and then add 6000 (kcal) for each residential unit to supply the hot water used. For example, for a building with an area of 3500 square meters, useful infrastructure, and 20 apartment units, the required heating power of the boiler is: 470,000 kcal = (20 × 6000) + (100 × 3500)
Advantages of cast iron boilers with blades over integrated steel boilers
- Suitable price and warranty for cast iron boilers compared to standard steel boilers
- Possibility to replace damaged boiler blades and repair them more easily than integrated steel boilers
- Smaller cast iron boiler dimensions and easy transportation due to the possibility of separating the boiler blades from each other
Factors that increase the life of cast iron boilers (in boilers that have more than 300,000 kcal per hour of heating power)
- The same thickness and continuity of the cast body of the cast iron boiler
- Torch flame adjustment (blue burner and direct longitudinal flow of the burner flame in the boiler)
- Use of suitable resin hardener with the volume of circulating water in the heating system or installation of descaler on the engine room pipes in proper size and number
- The proper length of the combustion chamber of the boiler and non-permanent impact of the flame to the rear or middle blades of the cast iron boiler
- Correct selection of burner with calculated heating capacity (heating power of burner up to 20% more than boiler capacity)
- Proper sealing of the boiler iron boiler blades during installation and the absence of high water pressure (too many floors) on the water pressure inside the boiler is undesirable.
- Selecting the appropriate capacity of the central heating boiler of the building so that even on the coldest days of the year, to provide heating and hot water to the building, the central heating boiler is not required to operate continuously and without interruption.
Chauffagekar superheat cast iron boiler warranty model 1300-13
Cast iron boiler model SuperHeat model 1300-13, like other products of Chauffagekar company, in addition to a 10-year warranty, has the technical support and extensive after-sales service of this company, all over the country.
In the store and reference site of Damatajhiz, technical information and guaranteed prices of all types of boilers, with the main guarantee, are provided for you to enjoy a good sense of optimal and smart purchase.