DamaTajhiz air washer 50000cfm model DTA-500

DamaTajhiz air washer 50000cfm model DTA-500

DamaTajhiz air washer DTA model with various capacities, from 2500 cfm to 50000 cfm, are designed and manufactured in various single-zone and multi-zone AHU models and under-ceiling, rooftop, industrial, and standing types.

The 50000cfm air washer of DamaTajhiz model DTA-500 with a capacity of 50000cfm is produced by DamaTajhiz company and can be used in hot and dry areas that have less than 40% humidity in summer and creates cool and pleasant air in homes, offices, workshops and...

Just so you know, the dimensions of horizontal air washer devices, based on standard models, along with the heating coil, are included in the technical specifications table section of each of these products.

advantages of DamaTajhiz air washer units

• Using FYH brand Japanese bearings
• Insulation of the body with 20 mm thick polyethylene
• Using Spico or Pumpiran water pumps
• Use of fiber polyamide joints (heat resistant) in the corners
• Equipped with washable aluminum filters and polymer nozzles designed by Bell of Germany
• The possibility of making air washers up to 15000cfm capacity in one piece and above that capacity in three pieces
• It has 1, 2, or 3 rows of heating coils with 8 to 14 fins/inch copper tubes (according to your needs)
• Connecting the fan and motor to the body of the device with an anti-vibration and a quality tarpaulin to prevent noise and vibration.
• Device column and The dampers are plated with aluminum profiles With alloy 6063 according to AROSIO Italy design
• Connecting different parts with bolt and nut structure and using special rubbers for complete sealing and air sealing of the device
• Using Siemens electric motors or similar models with protection class IP55 and thermal insulation class F in three-phase or single-phase
• Manufacture of air washers in standard models from 2500 cfm to 50000 cfm with the possibility of making devices in higher capacities as customized
• Using the fans of the Nicotra Italian company or Technifan, with high efficiency, low noise level, and maximum static and dynamic balance.
• Equipped with special dampers to adjust the entry of fresh air and return air also equipped with a mixing box for mixing fresh air with return air
• The outer part of the body of the device is made of galvanized sheet with a thickness of 1 to 2 mm (depending on the dimensions and capacity of the device) and the inner part of the body is made of galvanized sheet with a thickness of 1 mm.
• Design of air washer units in three classes 4, 6, and 8 (class 4 for places with low humidity, level class 6 for places with medium humidity level, and class 8 for places with high humidity level.)