Chauffagekar Gas-fuel Burner CKI-G180

Guide to Choose and Buy Chauffagekar Gas-fuel Burner CKI-G180

The Chauffagekar Gas-fuel Burner CKI-G180 is a device that converts fossil fuel energy into heat energy by combining fuel and air and igniting the flame of this mixture. The Chauffagekar Gas-fuel Burner CKI-G180 has a maximum heat capacity of 107,000 kcal per hour. Chauffagekar Company is one of the most well-known brands active in the production and supply of heating equipment in the country's industries and exports to all parts of the world.
In previous years, cast iron boilers were offered alone, with buyers providing separate burners to equip their boilers for use. However, unprofessionally, choosing two related products could result in the boiler, burner, or both failing. Chauffagekar Industrial Company chose the boiler and the burner standard and offered two products simultaneously to solve this problem. Benefits of choosing a standard boiler and burner include reducing combustion pollutants, increasing thermal efficiency and reducing energy consumption.

Features of Chauffagekar Gas-fuel Burner CKI-G180

• When choosing a gas burner for the CKI-G180 model, pay full attention to the diameter of the flame tube to allow the line to enter the boiler and install the burner.
• In general, when using the CKI-G180 model gas burner and the need to pay attention to the type of burner fuel, it is necessary to consider the burner capacity about 20% more than the capacity of the boiler or heater combustion chamber for various reasons.
• If the gas line pressure of the burner is 2 pounds, it is necessary to use a balancer to adjust and balance the small changes in gas pressure of the gas burner supply with the required size and flow of the burner gas at the beginning of the gas line. Also, suppose the gas supply pressure of the burner is higher than 2 pounds (15 or 30 to a maximum of 60 pounds). In that case, it is necessary to install a gas regulator with the appropriate size, working pressure and gas flow at the beginning of the burner gas line.
• Installing a gas filter with the appropriate size and working pressure after the quarter gas round valve and before the gas regulator and shock or solenoid valves is one of the first pieces of equipment required for the gas line in gas burners.
• It has an integrated body.
• It has an electric motor with a power of 100 watts
• It is a single-stage combustion method.
• No electrical panel
• Has control roller, manual air damper, solenoid valve, air and gas pressure
• It has a flame monitoring system of the ionization rod type.
• The above gas burner is suitable for 7-400 and 8-blade solar boilers, 8-300 to 10-blade solar, 8-300 to 9-blade super, 5-400 super, and Raad model boiler ground package.

Performance of Chauffagekar Gas-fuel Burner CKI-G180

• The inlet airflow is manually controlled by an air damper installed in the burner body based on its capacity.
• Gas burners can be classified into those that have a blower or fan and others without one (without sound). The burners used in apartment packages are of the kind of gas burner without blower and sound.
• The gas burner is designed to combustion natural gas, and the gas required for combustion in these burners, after passing through the gas filter, is controlled by a solenoid valve. A blower installed on the engine shaft supplies the necessary air for their combustion.
• The gas stream passes through a filter, mixes with the combustion air and is ready for combustion. If the combustion air pressure is too low or the gas pressure is too high or too low, this is sensed by the built-in pressure sensors and the burner is switched off by the force of the air and gas switches via the relay command.

Adjusting the Chauffagekar Gas-fuel Burner CKI-G180

Complete combustion of the fuel is the result of fine-tuning the fuel-air ratio. The more precisely this ratio is adjusted, the higher the combustion efficiency and therefore, less energy is required. In small burners, the air adjustment needed for combustion of the burner is made by a manual damper. Still, this adjustment is provided by an automatic damper for the required combustion air in large burners. However, because the air temperature of the engine room boiler and its humidity varies throughout the year, the air damper must be readjusted each season in large burners. Today, modern burners have an intelligent PLC control system that automatically adjusts the ratio between fuel and air throughout the day and all seasons.

Components of Chauffagekar Gas-fuel Burner CKI-G180

Pressure gas switch: Used to control the operation of the gas.

Pressure air switch: Used to control the airflow required for combustion.

Control relay: This part is responsible for controlling the work of the burner in such a way that by monitoring the step burners, it is piloted and by coordinating the different stages until the main flame occurs in case of any problem.

Air adjustment damper: To adjust the inlet air for combustion

Ignition transformer: The task of this part is to create a spark in the boiler burner, and as a result, ignition is created.

Warranty of Chauffagekar Gas-fuel Burner CKI-G180

The Chauffagekar Gas-fuel Burner CKI-G180 has a 1-year warranty from the Chauffagekar company.

There is a list of types of burners and the price of burners on the Damatajhiz website.