Energy Cellulose Evaporative Cooler Pala EC0750

Purchase Guide for Energy Cellulose Evaporative Cooler Pala EC0750

Energy Cellulose Evaporative Cooler Pala (smart) EC0750 is a proper and economic choice to cool in large houses and commercial, industrial, official, educational, and religious places.

Use of a cellulose pad as a replacement for common pads in Energy Cellulose Evaporative Cooler Pala EC0750 results in an increased cooling (approximately by 2-3 °C) and prevents the entrance of dust into the cooler channel due to higher water absorption of cellulose pad, regular, corrugated, and uniform layers of cellulose pad, uniform distribution of water on cellulose pad, and as a result, the greater effective contact surface between passing air and wet surface.

Technical specifications and guaranteed prices of an Evaporative cooler along with an original warranty for cellulose evaporative coolers with different capacities are provided on the DamaTajhiz website for your good feelings of an intelligent and optimized purchase.

Features of Energy Cellulose Evaporative Cooler Pala EC0750

• CE certificate No. 801382008480
• Given that during midnights the air temperature is low and continuous operating of coolers is not needed, Energy Company installed a thermostat-timer system on Pala series coolers to optimize the operating time.
• Smart cellulose evaporative coolers Pala series have smart control systems installed by an electronic board (which is moisture resistant) inside the cooler. The system receives command of the peripheral thermostat and water level meter and sends it to components such as the eater entrance solenoid valve, pump, and pan water drain solenoid valve, to control the water level. Thus, water entrance or drain and pan water change are done at the command of electronic boards.
• Some notable advantages of Energy Cellulose Evaporative Cooler Pala EC0750 are washable air filter, reasonable price compared to other cooling products, low power consumption, easy installation, minor cost of installation, and utilization.
• The use of weather-resistant powder color, sloping roof to prevent water aggregation on the roof when raining and snowing along with and appropriate packing are other advantages of this product.
• Energy Cellulose Evaporative Cooler Pala EC0750 is a proper choice for hot and dry climates.
  
  

  Remarkable Facilities of Energy Cellulose Evaporative Cooler Pala EC0750

• The first apparent difference of the Energy Cellulose Evaporative Cooler Pala series is its strong, lightweight, and simple plastic cover which makes it to be easily removed and reused for periodical visits and maintenances.
• Pala series cooler has a washable air filter between the outer cover and cellulose pad to prevent the entrance of dust into the cellulose pads before the air passes. For Energy Smart Cellulose Evaporative Coolers, instead of installing a floater to fill the pan, a water level meter along with a water entrance automatic solenoid valve is installed.
• Given the permanent evaporation of water on evaporative surfaces of coolers (in both straw and cellulose coolers), the mineral content of water gradually increases, which results in the deposition, reducing evaporative cooling efficiency and cooler lifespan. To solve this problem, Energy Company installed an automatic water drain solenoid valve on its smart cellulose coolers (which is responsible for draining a part of pan water in every two or three weeks) to prevent an increased water mineral content and deposition in Pala series coolers water pans.
  

  Technical Considerations for Installation and Operation of Evaporative Coolers

• If you are going to install the evaporative cooler on the roof, please note cooler sizes in the technical specifications table and the possibility of passing it from the roof door before purchasing the cooler.

• For middle-floor apartments with their roofs not directly receiving sunlight, use Evaporative Coolers EC0600 and EC0750 for up to 120 and 150 square meters of area, respectively.

• For top-floor apartments with their roofs directly receiving sunlight, use Evaporative Coolers EC0600 and EC0750 for up to 85 and 130 square meters of area, respectively.

• The size of the cooler channel should be greater than that of an evaporative cooler air outlet, otherwise, the air will be compressed passing through the channel, preventing sufficient airflow through the channel. In other words, the greater the channel size, the lower fan static pressure is needed for passing air, and as a result, the greater aeration and cooling of the evaporative cooler will be.

• Aeration and cooling of evaporative coolers completely depend on the consideration of engineering principles for the channels. Overall, cooler channel calculations have to be done by installation engineers, using ductulator and taking into account standards of path angle (inner arc radius) change and channel size change (with a maximum of 15 degrees). If these considerations are not taken into account, the evaporator cooler will not deliver sufficiently cooled air, and then, as it is seen nowadays, consumers will choose to use other cooling systems with high power consumption, such as split air conditioners, due to this problem.

• Automatic temperature control by thermostat

• Timer and remote control

  Warranty and After-sale Services for Energy Cellulose Evaporative Coolers 

  Energy Cellulose Evaporative Cooler Pala EC0600 has 18 months of warranty along with 10 years of after-sales services of Energy Company.