Absal Cellulose Evaporative Cooler AC-CP76

buying Guide For Absal Cellulose Evaporative Cooler AC-CP76

Absal Cellulose Evaporative Cooler AC-CP76 is one of the first nano cell pad (nano cellulose) water coolers produced in Iran, which has imported nano cellulose pads and is produced using high-quality materials and the application of nanotechnology. which has increased its quality and longevity. These pads are completely odorless and hygienic.
The surface of imported nano cellulose pads in the Absal AC-CP76 cellulose water cooler is covered with a resistant green layer to protect against corrosion and to be easily washable.
The uniform surface and uniform holes of the cellulose pads and the high and uniform absorption of water in them has increased the efficiency of the Absal cellulose evaporative cooler. The use of high-quality imported polymer materials in the production of these frames increases their resistance to cold, heat, and sunlight. Each cellulose pad is equipped with two separate and washable air filters that prevent the entry of dust and insects.
On the DamaTajhiz reference and store site, technical specifications and guaranteed prices of all types of Absal Evaporative coolers, with the original warranty, have been presented for your dear ones, to create a good feeling of optimal and smart shopping for evaporative coolers.

Advantages of Absal Cellulose Evaporative Cooler AC-CP76

• High efficiency
• It has 1/2 horsepower
• Made of high quality and standard galvanized sheets
• Equipped with a protective switch (to prevent electric shock)
• It has a maximum blowing power of 8350 cubic meters per hour
• It has high-quality oven powder paint (to prevent corrosion and early rusting).

Points that you should pay attention to before buying an Absal Evaporative Cooler

• The amount of aeration and coolness created by water coolers completely depends on observing the principles of ducting engineering, and in general, it is necessary to calculate the ducting of the cooler by installation engineers and using a dactylator, as well as considering the standards for changing the path angle (inner arc radius). and changing the dimensions of the channels (with a maximum angle of 15 degrees) if this issue is not taken into account, the expectation of creating cool air by the water cooler will not be fulfilled, and as can be seen, nowadays consumers have to resort to other cooling systems due to this defect. And they resort to high consumption such as split coolers.
• To calculate the approximate capacity of the water cooler required in weather conditions like Tehran, for the apartments located on the middle floors of the building and their roofs are not exposed to sunlight, and the ducting of the coolers has been done based on the correct methods (explanations below). Yes, for apartments up to 130 square meters, you can use a low-consumption water cooler similar to the ACDC 60 Absal model / for apartments up to 160 square meters, you can use the ACDC 80 Absal model.
• If the apartment unit you are looking for is on the highest floor of the building and its roof is directly exposed to the strong and hot light of the summer sun, by observing the other conditions listed above, for apartments up to 110 square meters, you can use a low-consumption water cooler similar to the ACDC model. 60 years / For apartments up to 150 square meters, use the ACDC 80 years model.
• The cross-section of the air outlet channel from the water cooler for ACDC 60 models should be at least 2300 cm2 (equivalent to 48 x 48 cm) and for ACDC 80 models at least 3000 cm2 (equivalent to 55 x 55 cm) (obviously) The exact dimensions are calculated based on the length of the channel, the required air volume and by the Dactylator.
• If the installation location of the water cooler you need is on the roof of the building, please pay attention to the dimensions of the required water cooler (which are given in the technical specification table) and the possibility of it passing through the roof of the building.
• In this case, the volume of air is condensed when it passes through the channel and prevents the proper flow of air through the channel of the cooler. The water cooler will increase.

Warranty and After-sale Services for Absal Cellulose Evaporative Cooler AC-CP76 

Absal Cellulose Evaporative Cooler AC-CP76 has a 2-year product warranty and a 5-year warranty for the electric motor, electric board, and electronic control switch.