Comparison of double wall storage tank with plate heat exchanger

As you know, factors such as the limitation of energy resources, environmental protection, etc. lead today's industrial world to the optimal use of resources and energy. Industrial units often try to improve energy consumption management to increase production efficiency and profitability. This is important even in cities and providing welfare in buildings.
The use of a double-wall source and a plate exchanger is one of the most effective methods of transferring heat to drinking water. The double wall source and the plate exchanger are among the pieces of equipment that are responsible for transferring heat from one fluid to the adjacent fluid. In this article, the comparison of the double-wall source with the plate converter is discussed. Please stay with us in the rest of this article to review and compare these two devices.
Click to view brands, models, and different types, find out the price, and Buy A INDIRECT WATER HEATER.

Application of double wall source and plate converter

In the following, we describe the applications of the double-wall source and the plate converter:

• Double-wall source: one of the main applications of double-wall sources is the production of hot water for buildings. The double-wall source, together with the boiler, burner, and other related equipment, together form the engine room in the building.
• Plate exchanger: There are various applications for the use of heat exchangers. The plate converter is used in various industries such as oil, gas, and petrochemical industries, chemical industries, pharmaceutical industries, textile industries, marine industries, milk pasteurization, etc.

The difference between a double wall source and a plate converter

As mentioned above, the double wall source and the plate exchanger are both responsible for transferring heat from one fluid to the adjacent fluid. But there are also differences between the double-wall source and the plate converter, which we will discuss further.

Storage capacity of double wall source and plate converter

Double wall sources are usually produced and used from 300 liters to 2000 liter capacity and working pressure up to 8 bar. But in plate exchangers, there is no space for storing hot water.

How to exchange heat in a double wall source

The cold water used enters the main source, which has a larger volume, and the hot water of the heating system, which is supplied from the boiler or boiler, flows into the peripheral or outer wall of the double-walled source. In this way, first, the sanitary cold water enters the main source of water storage or the internal wall through the inlet pipe located at the bottom of the double wall source. At the same time, the hot water of the engine room boiler heating system also enters the outer wall through the hot water inlet pipe located at the top of the double wall source and flows on the inner wall.
After exchanging heat with cold water, the water in the heating system loses its heat in the source and exits the source through the outlet pipe located at the bottom of the double-walled source and is directed to the boiler or engine room boiler for reheating. In general, due to the circulation of hot water in the heating system inside the outer wall (on the inner wall), sanitary water inside the tank is heated.

How to exchange heat in a plate exchanger

The most important components of plate heat exchangers are a large number of thin corrugated metal plates in a row, and between these plates, there are channels for the passage of fluids. After flowing into the exchanger, hot and cold fluids pass through these channels, and without direct contact between the two fluids, heat exchange takes place through these metal plates.

Conclusion

The double-wall source and the plate exchanger are types of equipment used for heat exchange and heat transfer from one fluid to another. By comparing the double-wall source with the plate converter, we found that the double-wall source is produced with the possibility of storing water and is mainly used in central engine houses. But plate converters are produced without storage space and are used in various manufacturing industries. We hope that the material presented in this article is useful and useful for you.
You can also read the article COMPARISON OF PLATE AND SHELL AND TUBE HEAT EXCHANGER for more information.

Final speech

The specialized collection (Damatajhiz) (the first and most reliable authority in the country in the field of building facilities equipment and all air conditioning devices), offers you all kinds of sand filters and hundreds of other products, guaranteeing the originality of the product, valid warranty, and reasonable price. In addition, if you have any questions about choosing and comparing the brands of this product, you can get free advice from the heating equipment experts.

In Iran, the first and most famous specialized group in the field of building installation equipment, air conditioners, and all equipment for swimming pools, saunas, and jacuzzis since 2004, DamaTajhiz is a specialized group. Refer to the time of this group. For more information, you can get advice from the experts of DamaTajhiz Engineering and Production Company by calling 021-88822550.

We are waiting for your call and look forward to meeting you at the DAMATAJHIZ group

By sharing the above article on social networks, let your friends know about its important content.