How to reduce electricity consumption in air conditioners and splits!

The correct use and proper operation of gas air conditioners and splits, like any other device, requires receiving information that, if you pay attention to them, in addition to benefiting from the cool and comfortable air of air conditioners and splits in the hot summer season, you will avoid paying a staggering amount of electricity. and on the other hand, regardless of those things, you may face a heavy cost of electricity consumption. Especially, in the current situation, the cost of electricity consumed by the units is calculated and received in a non-subsidized manner.
In other words, due to the jump in the price of gas consumption, it is not possible to close down the use of package heating devices and motor homes in the winter season, and the strategies to prevent the heat loss of buildings in the cold season should be told so that the subscribers can use as much as possible with a balanced cost of gas consumption. faced, for the summer season, it is necessary to tell the ways of reducing electricity consumption, which prevents excessive electricity consumption and related heavy costs, for the awareness of consumers, because today the use of air conditioners is popular due to the benefits and very cool air and Their products have been well received in Iran and most parts of the world and are increasing rapidly.

Click to view brands, models, and different types, find out the price, and Buy A SPLIT AC UNIT.

How to choose the right air conditioner or split

• It is better to use splits or air conditioners that have an inverter or energy consumption level A or B. Inverters increase or decrease the required speed of the motor (compressor) according to the amount of consumption.
• If the roof is located on the top of the apartment unit you are looking for and you live on the highest floor of the building, due to the hot sunlight shining on the roof of the building in the summer and transferring its heat to the unit under the roof, it is inevitable that for every square meter of considering the area of ​​the room or hall between 600 to 800 (BTU) cooling capacity, but if you live in the middle floors of the building, you can consider about 400 to 600 (BTU) cooling capacity per square meter for your air conditioner or split.
• For example: for a 25-meter living hall located on the middle floor of the building, a 12000 BTU split with 0.8 KW power consumption can be sufficient.
• If your building has a water cooler, but one of the rooms or the living hall is not cooled due to improper and incorrect ducting. You can close the valve of the cooler channel of that place and instead choose a suitable air conditioner for that part according to the above guide.
• Regarding which brand or brand to choose from the types available in the market, it is not possible to make an exact comment because, firstly, these devices are all similar in terms of structure and parts, and secondly, based on what capacity and how many panels you want, the spectrum Their products are different, but in general, since the use of split and gas coolers require proper after-sales service, it is better to choose the most famous ones in the field of after-sales service.
• If the electricity meter of your unit is 25 amperes, the total amperage consumption of the splits or air conditioners you choose should not be more than 20 amperes. Of course, the amperage provided in the power consumption of the splits is the starting and initial ampere, and after starting up, the required electric current will usually be about 30% less than the starting amperage.
• Of course, the advertisements of the companies that import inverter air conditioners that reduce electricity consumption by 60% in these air conditioners are neither proven nor logical. For example, let's assume that in July and August, when the air temperature even reaches 40 degrees, and your cooler and its compressor are working almost continuously to provide the desired and desirable air temperature, for example, 24 degrees, do you think that Can the amount of reduction in electricity consumption be up to 60% just because of the conversion of city alternating current to DC and the slow start of the compressor, cooler, inverter motorcycle?

The most suitable way to install and use split coolers

• The cool air of the splits flows from the inner panel to the opposite side. Therefore, place the inner panel in a place where it is in front of the sitting place or in the presence of the family members. The air throw length of the splits is usually between 5 and 10 meters based on the capacity. You should not think that it is necessary to cool down the whole hall so that you can cool down.
• Due to the accumulation of hot air under the ceiling, it is better to install the internal panel of the splits lower than the ceiling. Sometimes it can be seen that the installers leave the inner panel only 10 cm away from the ceiling. If in terms of beauty and decoration, the wall of the hall or room allows, you can ask the installer to have the upper edge of your split panel 40 or even 50 cm away from the ceiling, and this will effectively help to increase the flow of cool air on the surface.
• In shops, restaurants, or other spaces where the height of the ceiling to the floor is more than 2.8 meters, the installation of the internal panel can be done at a height of 2 meters from the floor of the desired place.
• Monthly washing and cleaning of the filters and the surface of the coil splits are very important in creating comfortable and cool air and increasing the efficiency of the device. Therefore, by opening the inner panel door, wash the filters monthly and wipe the surface of the coil with a damp cloth. (Remove the filters Put them in the air inlet of the panel from drying. (See the video below)

• By installing the canopy on the outer panel, the device's condenser can exchange heat and cool the cooler gas away from the hot sunlight with better efficiency and less electricity consumption.
  
  It is necessary to install the outer panel in such a way that the possibility of free air flow behind it is easily provided.
  
  If the insulation of the connecting pipes is destroyed, especially outside the building, your split will lose some of the precious coolness of the refrigerant. Therefore, repair the insulation of connecting pipes with an annual inspection.
  
  In the annual service, in addition to checking the amount of gas charge required by the cooler, ask the installer to make sure that the surface of the fins and coils of the external condenser is clean.

How to use air conditioners and splits optimally

• If you want to enjoy the cool and comfortable air of the air conditioner and split air conditioner if your electricity consumption is not too high, you can set the temperature of the cooler to 26 degrees Celsius. It is 30 watts. Most of the time, the compressor of the device, which has the largest share of the electricity consumption of the cooler, will be turned off. Here again, we remind you that placing the internal panel directly in front of the sitting area of ​​the residents also helps to provide cool air to the desired area.

• If you have not yet changed the lamps in your apartment to energy-efficient lamps, know that the heat from old lamps has a significant effect on creating annoying heat in your building, and it increases the operating time of the split cooler and consumes more electricity, so it is necessary to immediately Replace them with energy-saving lamps.

• If the surface of the windows is large compared to the surface of the entire unit and you have a window facing the east and especially the sunset, it is recommended to use double-glazed windows or anti-heat and anti-UV coatings on the surface of the glass to prevent heat radiation from entering in the summer. Use windows. These covers, which are easily placed on the surface of the glass, will once and for all relieve you of heat radiation in summer and also cold radiation in winter.

• But regarding the windows of buildings, the best option is to use UPVC windows with double-glazed and anti-reflective glass. If you are building or renovating your building, it is better to use UPVC windows, because these windows prevent the penetration of cold and hot air and the entry of noise, dust, and airborne particles, causing the greatest comfort and peace in the interior of the apartment, especially in Cities are crowded and polluted.

• It is better not to use the gas stove, iron, and other appliances that cause heat in the home between 7 and 10 pm by managing the household affairs. Because the resulting heat increases the working time of air conditioners and splits and consumes more electricity.
  
  You can also read the article WHEN SHOULD DUCTED SPLITS BE USED for more information

Approximate calculation table of air conditioner and split capacity

For the approximate calculation of the air conditioner and split capacity required (in weather conditions such as Tehran, Mashhad, Karaj, Isfahan, Erbil, Kabul, Sulaymaniyah, Halba, and other cities with similar weather) in the middle floors of the building, about 400 to 600 (BTU) per square meter, and in the floors above which there is a roof, due to direct radiation The sunlight on the roof is considered between 600 and 800 (BTU) per square meter of the infrastructure. For example, for a 12-meter room split 9000, for a 17-meter split 12,000, for a 25-meter split 18,000, for a 40-meter hall, 24,000, and for a 45-meter hall, 32,000. You can also refer to the table below for the approximate calculation and determination of the capacity of the split or air conditioner for greater convenience and determine the capacity of your air conditioner and split according to the conditions and bases of the above calculations. The following table shows the approximate ratio of the capacity of the air conditioner to the square footage of the environment in moderate weather.

Final speech

The specialized collection (Damatajhiz) (the first and most reliable authority in the country in the field of building facilities equipment and all air conditioning devices), offers you all kinds of sand filters and hundreds of other products, guaranteeing the originality of the product, valid warranty, and reasonable price. In addition, if you have any questions about choosing and comparing the brands of this product, you can get free advice from the heating equipment experts.

In Iran, the first and most famous specialized group in the field of building installation equipment, air conditioners, and all equipment for swimming pools, saunas, and jacuzzis since 2004, DamaTajhiz is a specialized group. Refer to the time of this group. For more information, you can get advice from the experts of DamaTajhiz Engineering and Production Company by calling 021-88822550.

We are waiting for your call and look forward to meeting you at the DAMATAJHIZ group

By sharing the above article on social networks, let your friends know about its important content.