Garmasun Industrial Radiant Heater MR-40U

 GARMASUN INDUSTRIAL RADIATION HEATER MR-40U PURCHASE GUIDE

Garmasun Industrial Radiant Heater MR-40U uses the radiation method to heat environments with an area of ​​120 to 150m² and a height of 4 to 5 meters such as workshops, gyms, large greenhouses, etc. Reducing electricity consumption, which is possible by using Garmasun MR-40U industrial radiant heaters, has made these products in the range of cost-effective products.
This product, like the sun, distributes the necessary heat evenly on the surface and prevents high-temperature condensation in the space. The use of ceramic elements causes a uniform distribution of heat; Using the radiation method to create heating, up to 60% in fuel consumption and 90% in electricity consumption are saved. By installing this radiant heater, the initial capital of its installation and commissioning will return to the consumer economic cycle in a short period of time, and this is due to the precise design, the use of the ceramic element, and, course, the reduction of energy consumption.

FEATURES OF GARMASUN INDUSTRIAL RADIANT HEATER MR-40U

• By installing this radiant heater, the initial capital of its installation and commissioning will return to the consumer economic cycle in a short period of time, and this is due to the precise design, the use of the ceramic element, and, course, the reduction of energy consumption.
• These ceramic radiant heaters generate the necessary heat in the environment in the shortest possible time.
• The heating function of these heaters is such that even if the doors of sports or industrial halls are open, the desired heat is provided.
• The combustion efficiency of Garmasun industrial radiant heaters is over 92% and all environmental standards have been observed in the manufacture of these products.
• In addition, if you choose the above heaters to create the necessary heating in large spaces, you do not need any engine room facilities such as boilers, burners, plumbing, heater units, circulator pumps, etc.
• In general, because heat moves from the bottom to the top of enclosed spaces, Garmasun industrial heaters focus on heating the floor (initially) but then distribute the heat evenly (in environments with high ceilings). ) Scatter.

 BEFORE INSTALLING GARMASUN INDUSTRIAL RADIANT HEATER MR-40U, PAY ATTENTION TO THE  FOLLOWING POINTS

• The nominal gas pressure of these devices for optimal operation is 15 to 30 mBar.
• Gas extraction operation should be done after installing the heater and observing the standards of gas management.
• Electricity consumption of Garmasun industrial radiant heaters is single phase and the cable consumption should be 1.5 x 3 mm.
• Be sure to note that the maximum branch distance of the inlet gas pipe of the device should be 1/5 meter and the size of the pipes should be at least 1/4 of 1 inch.
• It is recommended to use a 2-pound gas extraction system using a 2-pound regulator in the main path and a stabilizer for each product to achieve the desired performance of this Garmasun heater model.

FREE ACCESSORIES FOR GARMASUN INDUSTRIAL RADIANT HEATER MR-40U

• Electrical panel
  
• Gas stabilizer
• Miniature key
• Installation chains and fittings
• Electric burner protector
• Brushed gas hose with nuts and tubes

WARRANTY AND AFTER-SALES SERVICES OF GARMASUN INDUSTRIAL RADIANT HEATER MR-40U

The above products have a 3-year warranty and 15-year after-sales service.

In the reference and shopping website, Damatajhiz, the technical specifications and guaranteed radiant heater price, with the main guarantee, have been provided for dear customers to create a good feeling of optimal and smart purchase.