Sabafarin Unit Heater

Sabafarin unit heaters are produced using 20 years of experience and manufacturing standards in 12 types of warm water and steam, which has made it one of the best in the country due to its interesting design from the point of view of beauty and thermal efficiency. We suggest you stay with us for the rest of this article to get more specialized and complete information about technical specifications, dimensions, heating capacity, reasonable price, and familiarity with Sabafarin company.

Sabafarin unit heater at a glance

Sabafarin unit heaters are produced using the expert opinions of experienced engineers and experts in hot water and steam models, which are among the best due to their interesting design from the point of view of body beauty. Unit heaters are used for heating industrial halls, sports facilities, warehouses, swimming pools, passenger terminals, etc. In addition, by adding rows of pipes in the coils, we can use them for cooling.

The unit body of Sabafarin heaters is made of the best type of steel (ST14) using special molds and fixtures.
In order to prevent the transmission of vibrations from the electrofan to the Fan Cowl and the body and to minimize the vibration of the device, separate support has been considered for the installation of the electric motor, which makes the Sabafarin unit heater vibration-free.

Examining the benefits and features of unit heaters of Sabafarin company

Sabafarin unit heater electric motors are manufactured by Motogen, a reputable company, and are produced in two single-phase cycles of 900 and 1400 rpm.
Sabafarin unit heater has a very high thermal efficiency, and by purchasing this heater unit, you can save a lot of energy.
The body of the Sabafarin warm water unit heater is made of steel (ST14) using special molds and fixtures.
The method of painting the body of the Sabafarin warm water unit heater is that, after passing through the path of degreasing, phosphating, and draining, the parts of the body are passed through the drying oven and dried in an automatic line, and then they are painted with powder paint. Electrostatic broaching) is covered and finally, the piece goes into an oven with a temperature of 200 degrees Celsius for baking.
Sabafarin unit heater has adjustable dampers with a special steel profile. These dampers can be adjusted so that the hot air can be easily directed to the required place.
In places where there is a need for high launch, special dampers with adjustable levers (in the form of AirFoil) can usually be used. The dampers for the launch double the launch of normal dampers and increase the thermal efficiency of the unit heater.
Sabafarin heater coil unit is made of copper tube with a diameter of 5.8 inches and fins are made of aluminum flat type (Fin Plate) with a density of 12 fins per inch.
Due to the low thermal level and the incomplete connection of spiral finned pipes, these pipes are not used in the construction of Sabafarin coiled hot water unit heaters.
In the case of the customer's order, stainless steel pipes are also used in the production of Sabafarin coiled unit heaters.
The coils of the hot water unit heaters are tested under 10 bar hydrostatic pressure after production.
The heating values of Sabafarin unit heaters are considered in the condition that the temperature of the water entering the unit heater is equal to 90 degrees Celsius (194 degrees Fahrenheit) and the temperature of the incoming air is equal to 60 degrees Fahrenheit.

Determining the capacity and choosing the unit heater

For cold regions such as Karaj, Qazvin, Tabriz, Mashhad, etc., about 400 BTU per cubic meter of hall space per hour, and for more temperate and southern regions of Iran, about 250 BTU per cubic meter of hall space per hour. be taken
Due to the noisy operation of the unit heater fan at 1400 rpm, it is better to order a two-speed or 900-speed motor with a higher heating capacity when choosing the required unit heater.

Important points after buying a unit heater

In the hot water unit heater, the hot water inlet pipe is connected to the bottom of the unit heater and in the steam unit heater, the steam inlet pipe is connected to the top of the unit heater.
Installing an automatic air valve in the return water path is mandatory for hot water unit heaters.
The installation location of the air valve in the hot water unit heater is on the water outlet pipe and outside the device.
If you need to calculate the flow rate of hot water, divide the capacity of the hot water unit heater (BTU) by 10,000 to get the amount of G.P.M of hot water circulating in the unit heater.

1 Atm. = 14.7 P.S.I 1K.Cal. = 4 B.T.U
1M³/hr. = 0.588 Ft³ / min 1M³ = 35.15 Ft.³
1M/S = 196.85 Ft./min 1Ft./min = 0.0051 M/S

Buying Sabafarin unit heater

Before buying, keep in mind that three-phase electric motors or explosion-proof electric motors are used in the production of Sabafarin hot water unit heaters, in environments where there is a possibility of explosive gases.

On the site of Damatajhiz's specialized collection, technical information on all types of Sabafarin hot water unit heaters, with original warranty, has been provided for you, dear ones, to enjoy the good feeling of optimal and smart shopping.

Sabafarin unit heater price

Before choosing the heating capacity, ventilation volume, and motor power of the unit heater, you should first pay attention to the type of heating fluid (hot water or steam) and how the unit heater is placed (wall or ceiling).

If you don't have enough information to buy unit heaters, you can see all the necessary information for choosing and buying Sabafrain unit heaters on the specialized website of Damatajhiz. All unit heaters offered on the website of the Damatajhiz collection have reasonable prices and the discounts desired by consumers have been included in these prices.