What is a Heat Exchanger?

As the name of the heat exchanger implies, this device has a duty of heat exchange between two fluids. The fluids can be water, gas, oil, air, etc.
Increasing the efficiency of industrial units to enhance production and profitability, rising energy prices, and the growing harmful impact of greenhouse gases have all compelled industrial units to strive for energy conservation and storage. The use of heat exchangers is one of the most effective solutions to achieve this goal.
In the following, we will discuss what a heat exchanger is, its applications, the various types of heat exchangers, schematic representations, and the working principles of some of these exchangers.

Types of Heat Exchangers

Types of heat exchangers in central heating and air conditioning systems, according to building type, are as follows :

• Plate Heat Exchanger
• Shell & Tube Heat Exchanger
• Air Cooled Heat Exchanger
• Double Pipe Heat Exchanger
• And other types, such as Plate-and-Tube Heat Exchanger, Spiral Heat Exchanger, Direct Contact Heat Exchanger, Regenerative Heat Exchanger, etc.

Each of the mentioned types is divided into the following subgroups

• Co-flow Heat exchangers
• Crossflow Heat exchangers
• Counterflow Heat exchangers

The following is each type of heat exchanger in more detail.

Shell and Tube Heat Exchangers

Shell and tube heat exchangers are very popular in air conditioning, pools, and even chemical industries. As indicated by their name, they include a high-pressure, large cylindrical tank (shell) housing several tubes. The liquid moves through the pipes, and hot water or steam passes over these tubes inside the shell. A large number of the said tubes and their great contact surface effectively transfer heat to the liquid in the tube and heat it.
Shell and tube is the most popular type of heat exchanger, which is categorized into different sub-types based on the number of tube and shell passes. The simplest kind features a single pass of tube and shell (figure below). These heat exchangers usually have a partition inside, also known as baffles, which creates turbulence and lateral velocity in the flow and therefore increases the convective coefficient of the fluid in the shell. Heat exchangers with baffles usually have a single pass of shell and two passes of tubes or two passes of shells and four passes of tubes. The fluid is directed perpendicular to the tubes between the two adjacent baffles.

U-shaped shell and tube heat exchangers are the cheapest as they only require a single tube plate. The tube interior cannot be cleaned mechanically due to the sharp U-turn. These exchangers use an even number of tube passes and are not limited in terms of thermal expansion.
A. In shell and tube heat exchangers, the tubes are responsible for heat exchange, such that the two sides of a tube are in contact with fluids at different temperatures. They act as a separating element and come in different sizes. They are mostly made of copper; however, they can also be manufactured from stainless steel, nickel, aluminum, brass, or titanium. Considering the heat transfer coefficients of the fluids inside and outside of the tube, fins, and baffled tubes can be employed on the side with a lower coefficient, which also imposes some costs.

B. The shell and the tube sheets hold the tubes and connect the inlets and outlets. Tube thickness depends on the operating pressure and shell thickness.
The shell is normally made of stainless steel as it needs to offer the lowest level of heat transfer while providing high-pressure tolerance. The shell will hold the water inlet and outlet, the hanging hook, the discharge valve, the sensor safety valve, and other components.

Different flow regimes can exist on the shell and tube sides of these exchangers. The regime types are selected according to attributes such as heat transfer surface, operating pressure, coil pressure drop, manufacturing process, corrosion-control costs, and maintenance. Baffles are used to increase the heat transfer coefficient at the shell side and to better secure the tubes.

Plate Heat Exchangers

Plate heat exchangers have been in use for more than 100 years, and come in gasket and brazed variants. The gasket types are mostly used in air conditioning, food industries, petrochemical industries, the painting section of automobile production, petroleum industries, etc. They also include frame costs compared to brazed heat exchangers and, therefore, are more expensive at identical sizes and capacities. However, they offer easy scalability, repair, and maintenance compared to the gasket types.
Due to the significantly high total heat transfer coefficient, small dimensions, and higher efficiency of plate heat exchangers compared to conventional shell and tube heat exchangers (such as coil and double-glazed resources), they can instantly supply hot water consumption for the consumer without any need for storage (such as coil and double-glazed resources) and completely hygienic, especially when the softener is installed on the path of the inlet cold water.
Welding heat exchangers are mainly used for supplying hot water for consumption in buildings, water heating of pools, floor heating systems, oil cooling, and an evaporator and condenser in chillers. They should be calculated accurately in all cases except for hot water consumption. In this regard, you can negotiate with the experts of the DamaTajhiz engineering company.

Gasketed plate heat exchanger

Welded plate heat exchanger

Tips for Installing Plate Heat Exchangers

Here are handy tips for installing a plate heat exchanger:

• The plate heat exchanger can be installed horizontally and vertically, but in both situations, it should be noted that the converter has to be installed in such a way that air can easily flow out.
• In a horizontal position, it is best to place the head of the inlet and outlet pipes upward, and in the vertical position, the heads of these pipes should have a little slope upward.
• It is recommended to use a chassis for the installation of a large plate heat exchanger so that it is fixed without excess weight being applied to the tubes or to avoid placing it directly on the floor of the engine room. The most important point in installing a plate converter is how the input and output pipes are connected.
• In most plate heat exchangers, the input and output locations do not matter, and the only important thing is that the input and output should be in opposite directions. However, in some exchangers, considering the input and output direction is effective on heat exchangers' efficiency due to guiding fins inside the plates.
• Note: When installing a plate converter, be sure to use a check valve in the water inlet toward the heat exchanger. And always keep in mind that the path of heating water and heated water should be the opposite. Also, before installing the plate converter, be sure to read the manufacturer's catalog. Today, the use and installation of plate heat exchangers in house engine rooms and industrial workshops have become popular. With the proper use of this equipment, its numerous advantages can be gained, and its disadvantages can be reduced to the optimum level.
• In addition to the need to install a softener in the path of the water heat exchanger mentioned earlier, installing nuts and unions, and valve flanges on all water inlet and outlet pipes from the heat exchangers is essential for periodic services and acid cleaning.
• Considering the necessity of using a check valve + two smoother (filters) as well as linear water softener (magnetic, electronic, etc.) during the installation and operation of a variety of plate heat exchangers, in case of the absence of aforementioned requirements in the project, when buying a heat exchanger, make the purchase of these accessories in proportion to the size of the input and output pipes.

  

After all, if you have more questions to decide about buying different types of "plate" and "shell-and-tube" heat exchangers, you can contact DamaTajhiz company and ask your questions.

Plate Heat Exchanger vs. Shell-and-Tube

Important to determine the pressure drop of water flowing through the coils or heat exchanger plates (and air passing through the heat transfer coils) to calculate the head of the pump circulator or the static pressure of the aeration fan.
Also, the correct calculation of the inlet and outlet water pipe diameter of heat exchangers with water as the working fluid leads to the delivery of sufficient fluid, enabling the needed heat transfer in the heat exchanger.
The following diagram can be used to calculate the diameter of steel tubes in heating and cooling systems.

Air-Cooled or Finned Heat Exchangers

Finned heat exchangers are mainly used for “gas-gas” or “liquid-gas” applications that are widely used in various industries including refrigeration in very low temperatures such as condenser and evaporator in fridge systems, energy recovery, process industries, refrigeration, and air conditioning systems such as cold water coil, warm water for HAU, fan coils, warm water coil of heater units…. Fanned plate heat exchangers are used in gas turbines, nuclear power stations, and propulsion engineering, refrigeration, heating, and air conditioning of excess heat recovery systems, chemical industries, and cooling.

Since water flow in all heat exchanger processes results in scale formation (calcium, magnesium, and zinc minerals) on heat exchanger surfaces of various types of heat exchangers (shell& tube, and plate), this leads to a great loss in heat exchange efficiency, it is necessary to install softener or descaler in the path of input water to preserve their efficiency.

In the time of selecting the heat exchanger required for the project, in addition to calculation and determination of capacity and heat transfer area, type, size, and also the material of heat exchanger, essential factors of water pressure loss in coil or heat exchanger plates (and air passing through heat transfer coils) should be determined for calculation of circulator pump´s head or static pressure of aeration fan.

The heat exchangers are also used in swimming pools, saunas, and jacuzzi heating systems. In the picture seen below, the location of the heat exchangers, as the heating system of the pool, along with other pool equipment, is precisely determined.

Due to their steel body, Plate heat exchangers are simply used to heat the pool water. However, it should be noted that the heat exchanger should be placed after the filter and before disinfecting equipment such as a chlorinator.

For Heat Exchangers, www.damatajhiz.com is the reference, and the most-visited website in the Middle East (since 2004, source: Alexa.com rankings). With a little patience, you can find brief, sufficient information about your desired product and purchase it at the best price (guaranteed best deal) with excellent after-sales services and a reliable guarantee.

Double-Pipe Heat Exchanger

The Double Pipe Heat Exchanger is one of the simplest types of heat exchangers, consisting of one pipe placed inside another. In this design, one fluid flows through the inner pipe while the other flows in the annular space between the two pipes. Heat transfer takes place across the pipe wall, making it suitable for applications where only a small to medium heat exchange capacity is required. It is commonly used in industries for cooling or heating liquids in relatively straightforward processes.
Although its construction is simple and cost-effective, the double pipe heat exchanger has certain limitations. It is not efficient for large-scale heat transfer due to its limited surface area and higher space requirements compared to compact designs like plate heat exchangers. However, it remains a practical choice for laboratories, pilot plants, and small industrial units where flexibility and ease of maintenance are important.

Advantages of Heat Exchangers

• Wide application
• Ease of maintenance
• High heat transfer surface-to-volume ratio

Heat Exchangers at a Glance

Nowadays, almost all countries around the world are moving toward industrialization and the industrialization of their production. Considering the urgent need of various industries for energy, as well as the limited energy resources worldwide, topics related to energy storage and preventing energy wastage have gained special importance. In addition to protecting the environment, which is one of today’s major concerns, energy storage also provides benefits for industries.
The specialized collection (Damatajhiz) (the first and most reliable authority in the country in the field of building facilities, equipment, and all air conditioning devices), offers you all kinds of sand filters and hundreds of other products, guaranteeing the originality of the product, a valid warranty, and a reasonable price. In addition, if you have any questions about choosing and comparing the brands of this product, you can get free advice from the heating equipment experts.
In Iran, the first and most famous specialized group in the field of building installation equipment, air conditioners, and all equipment for swimming pools, saunas, and jacuzzis since 2004, DamaTajhiz is a specialized group. Refer to the time of this group. For more information, you can get advice from the experts of DamaTajhiz Engineering and Production Company by calling +98-930-288-0251.

"Knowledge Fuels Better Choices"

Registered Trademark and Stewardship Business Licenses Issued by the Union of Virtual Business Association and the HVAC Equipment Industry.

DamaTajhiz HVAC Participation at International HVAC and Construction Facilities Exhibitions Demonstrates its Global Reach and Commitment to the Industry.

We Look Forward to Your Call and the Opportunity to Meet You

SHARE THIS CONTENT TO SPREAD THE KNOWLEDGE